User manual KENWOOD KDC-Z838

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Press the [DISP] button for at least 1 second. Disc Naming (DNPS) Attaching a title to a CD. 1 Play the disc you want to attach a name to · A title can't be attached to an MD. · Refer to the 'Switching Display' (page 8) and select the "DNPS" display. 2 Enter name set mode Press the [NAME. S] button for at least 2 seconds. "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [4] or [¢] button. 4 Select the characters Press the [FM] or [AM] button. 5 Repeat steps 3 through 4 and enter the name. 6 Exit name set mode 18 | English Menu system SRC MENU FM AM PTY SCAN RDM REP M. RDM TI FM AM 4 ¢ NEWS indicator RDS indicator Menu display Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 4 Exit Menu mode Press the [MENU] button. · When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. (Normally the uppermost setting in the chart is the original setting. ) Also, the explanation for items that aren't applicable ('Manual Clock Adjustment' etc. ) are entered step by step. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. 2 Select the menu item Press the [FM] or [AM] button. Example: When you want to set the beep sound select the "BEEP" display. 3 Set the menu item Press the [4] or [¢] button. Example: When "BEEP" is selected, each time the button is pressed it switches "BEEP ON" or "BEEP OFF". You can continue by returning to step 2 and setting other items. When "NEWS 00M" -- "NEWS 90M" is set, the News Bulletin Interrupt function is ON. When it's ON, the "NEWS " indicator is ON. When the news bulletin starts, "NEWS" is displayed, and it switches to the news bulletin. · If you choose the "20M" setting, further news bulletins will not be received for 20 minutes once the first news bulletin is received. · The news bulletin volume is the same level that was set for 'Traffic Information' (page 13). · This function is only available if the desired station sends PTY-code for news bulletin or belongs to 'Enhanced Other Network'-Network sending PTY-code for news bulletin. · When the News Bulletin Interrupt function is ON, it switches to an FM station. Selectable Illumination Selecting the button illumination color as green or red. Display "KEY RED" "KEY GRN" Setting The illumination color is red. The illumination color is green. Switching Display Type Setting the Display type. Display "DISP C" "DISP A" "DISP B" Setting Demonstration. Silent display type. In Tuner mode Local Seek Only stations whose reception is good are searched for in auto seek tuning. Display "LO. S OFF" "LO. S ON" Setting The local seek function is OFF. [. . . ] The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. There's already another disc inserted. Press the [0] button and remove the disc. [. . . ]