User manual KENWOOD KDV-5241UY

[. . . ] When connecting with the USB cable Operations using the control screen Listening to the other external components 32 Selecting a preset sound mode 34 General settings -- PSM 36 Disc setup menu 40 More about this unit 42 Troubleshooting 49 Specifications 53 Operations using the control panel Selecting a folder/track on the list (only for MP3/WMA/WAV file) Operations using the remote controller Operations using the on-screen bar Operations using the control screen Operations using the list screen To prevent injury or fire, take the following precautions: ⷠTo prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. ⷠDo not watch or fix your eyes on the unit's display when you are driving for any extended period. If you need to operate the unit while driving, be sure to look around carefully. If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. [. . . ] 2 Adjust the speaker output balance by pressing: 5 / : between the front and rear speakers. /¢ : between the left and right speakers. [L6 to R6] B Subwoofer 1 Press number button 1 ( ) to move to the "Subwoofer" adjustment display. Off *: All signals are sent to the subwoofer. ⷠ55Hz: Frequencies higher than 55 Hz are cut off. ⷠ85Hz: Frequencies higher than 85 Hz are cut off. ⷠ120Hz: Frequencies higher than 120 Hz are cut off. 3 Turn the control dial to adjust the subwoofer output level. [0 to 8] 4 Press number button 1 ( ) to move to another setting level. * If "Off" is selected in step 2, you can only adjust the subwoofer phase. 62Hz: Frequencies lower than 62 Hz are cut off. ⷠ95Hz: Frequencies lower than 95 Hz are cut off. ⷠ135Hz: Frequencies lower than 135 Hz are cut off. D VolAdjust, [­5 to +5] Turn the control dial to adjust the input level of each source (except FM). Adjust to match the input level of the FM sound level. ⷠBefore making an adjustment, select the source you want to adjust. e Loudness , [Off or On] Turn the control dial to select "Off" or "On". When "On" is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level. 1 Press 4 /¢ to select the frequency band, then press 5 / to enhanced level for the selected frequency band. [­6 to +6] 2 Press number button 5 ( ), then turn the control dial to select the frequency. 3 Press number button 5 ( ), then turn the control dial to select the quality slope (Q). Repeat steps 3 and 4 to adjust the other frequency bands. [. . . ] This unit can only display letters (capital: A ­ Z, small: a ­ z), numbers, and a limited number of symbols (see page 45). The track played back is not a playable file format (MP3/WMA/WAV). Playback order may differs from the one played back using other players. Do not use too many hierarchy, folders and empty folders. [. . . ]