User manual KENWOOD KDV-MP4339

[. . . ] If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth. Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. How to reset your unit The unit returns to factory settings when the Reset button is pressed. [. . . ] 3 Select a search mode category, then the desired To return to the previous search mode screen, press MENU. * Functions only if you select "All Albums" or "All" in "Albums" of the main "MENU". You can also change the settings from the PSM (Preferred Setting Mode) items. Listening to the other external components Preparation: Make sure to connect and turn on the monitor to watch the playback picture. Turn on the connected component and start playing the source. Adjust the sound as you want (see pages 34 and 35). 5 mini plug cable (male ­ male) are used, a noise may be generated during source switching. * Portable Video/Audio player of this pin-allocation can be connected: 1 Audio (R) Video GND 2 GND GND 3 Video Audio (R) Audio (R) 4 Audio (L) Audio (L) Audio (L) Camcorder iPod, etc. You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer). If "Bypass" is selected, you can listen to the original sound mode recorded. You can adjust the sound characteristics to your preference. 3 Press number button 5 ( ), then turn the control dial to select the quality slope (Q). Repeat steps 3 and 4 to adjust the other frequency bands. Storing your own sound modes You can adjust the sound modes and store your own adjustments in memory. ⷠWhen is shown on the display, you can move back to the previous screen by pressing number button 6. You can change PSM (Preferred Setting Mode) items listed in the table below and on pages 36 ­ 39. Repeat steps 2 ­ 4 to adjust other PSM items if necessary. By pressing either one of the buttons repeatedly, you can also move to the item of the other categories. Off Setting, [reference page] : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [8]. : Clock time is shown on the display when the power is turned off. : Cancels; pressing DISP will show the clock time for about 5 seconds when the power is turned off, [8]. *1 If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select "Off" to save the car's battery. [. . . ] ⷠRecord the audio track using MP3 or Dolby Digital as the audio stream of DivX files. ⷠRecord the audio track using MPEG1 Audio Layer 2 as the audio stream for MPEG Video files. This is caused by how the tracks are recorded. insert a disc that contains tracks of appropriate formats. [. . . ]