User manual KENWOOD KDV-U4349M

[. . . ] Error 72 DVD language codes Accessories/ Installation Procedure Connections Installation Specifications 73 75 76 78 80 DVD language codes Accessories Connections Installation English 3 How to read this manual This manual uses illustrations to explain its operations. Tuning mode The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. Sets a tuning mode for selecting stations. 1 Set to the menu mode VOL AUD SETUP /PTY DISP Q MENU STOP M/S SCAN RDM REP F. SEL M. RDM AM SW SRC OFF MENU 2 Select a tuning mode There are three types in the tuning mode. Display AUTO1 AUTO2 MANUAL Setting Receives stations with the best reception. (Auto 1) Receives the stations memorized. [. . . ] This information remains displayed until an image is displayed on the monitor. You can select the information to show when "" and "5" are displayed. !" " 3 Display the file list # !Media information Play time and text information is displayed. " Status information Play function setting status is displayed. # Source information display Receiving frequency, band, number of channels, etc. Play time, title/track/chapter number, setting status of each function, etc. are displayed while playing DVDs, etc. 2 Display disc and file information 4 Select a file to play from the list Audio file, movie file, or picture file list is displayed. Information on the disc and the file is displayed. Depending on discs, you can switch the displayed information as you press this button. · The file list is not displayed if the disc being played does not have an audio file, movie file, or picture file. 48 KDV-U4349M Removing operation panel Removes the operation panel. 1 Open the operation panel Installing operation panel Installs the operation panel. 1 Align the operation panel with the main unit 2 Remove the operation panel Antitheft warning lamp Push in the panel aligning the hole in the panel with the shaft at the right of the main unit. 2 Install the operation panel English 49 Display Control · Removing the panel turns off the power. · Since the panel is a precision component, it may be damaged by shock when exposed to vibration or dropped. Store the panel with care after removing it. · Do not store the removed panel in the following places. : Can be set in other than standby state. : Can be set while accessing DVD source. : Can be set while accessing AUX/AUX EXT source. 5 Exit menu mode VOL AUD SETUP /PTY DISP Q MENU STOP M/S SCAN RDM REP F. SEL M. RDM AM SW SRC OFF · "ZONE2" is displayed while the dual zone function is set to ON. · "SWPRE" is displayed when dual zone function is turned OFF. · "CD READ" can be set while no disc is inserted in the unit. · "CLK ADJ" cannot be set if "SYNC" is set to "ON". · "OFF" setting will not be operative unless "CODE SET" is performed. · For further information on each feature, refer to <Help?Term> (page 68). English 51 Menu Menu Setting security code Sets a security code to prevent theft. 5 Confirm the entry ATT FM SCRL AME VOL AUD SETUP /PTY DISP Q MENU STOP M/S SCAN RDM REP F. SEL M. RDM AM SW SRC OFF · Before setting a security code, turn off the demonstration mode. For further information, refer to <Demonstration setup> (page 53). [. . . ] · If your car is not prepared for this special connectionsystem, consult your Kenwood dealer. · Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. · Make sure that all wire connections are securely made by inserting jacks until they lock completely. · If your vehicle's ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i. e. , it will not turn on and off along with the ignition). [. . . ]