User manual KENWOOD KGC-6042

[. . . ] Before applying the power Caution : Read this page carefully to ensure safe operation. How to use this manual This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information. Shows you how to connect your audio and video components to the receiver and prepare the surround processor. Since this receiver works with all of your audio and video components, we will guide you in setting up your system to be as easy as possible. [. . . ] If you have selected a component connected to the CD/DVD, VIDEO2, DVD/6CH jacks, make sure that the input mode setting is correct for the type of audio signal to be used. 2 Hold down the AUTO key for more than 2 seconds. To return to the original indication, repeat procedure 2. You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the Loudness key to turn the LOUDNESS setting ON. Press the Loudness key again so that the "LOUDNESS" indicator goes off. The MUTE key lets you mute the sound of the speakers. Press the MUTE key again so that the "MUTE" indicator goes off. MUTE ON can also be deactivated by turning the volume control knob. You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. This is due to the copy guard condition. Usually use the A-REC (Auto-Record) mode to record audio input sources. When the digital mode changes during recording in the A-REC mode, the audio input source may be interrupted momentarily. If the audio reproduction stops in the middle due to change in the input signals, etc. The receiver can store up to 40 stations in the memory and recall them by one-touch operation. Radio stations can be classified into RDS (Radio Data System) stations and other stations. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. If fewer than 40 RDS stations have been stored in the preset memory, regular FM stations will be stored in the remaining places. Radio Text function Displays the radio text data transmitted by some RDS stations when you press the RDS Disp. The "RDS" indicator lights up when an RDS broadcast (signal) is received. Before using a function utilizing the RDS, be sure to perform the RDS Auto Memory operation by referring to the description in "Presetting RDS stations (RDS AUTO MEMORY)". [. . . ] The audio cord from the record player is not connected to the PHONO jacks. A humming noise is generated when the PHONO input selector is selected. When playing a Dolby Digital source signal using a DVD player, the sound is cut off soon after it starts. No sound is produced during playback from a DVD player. [. . . ]