User manual KENWOOD KMD-C80

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Push back on the right side of the faceplate with your hand until it locks. 0 Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. NOTE The external disc control mode will differ, depending on the unit that is connected. Mode Display Examples · "CD". . . when a CD player is connected · "DISC". . . when a disc changer is connected · "DISC-1", "DISC-2". . . when two disc changers are connected Pausing and Restarting Disc Play: Press the 38 button to make the disc pause. Press the same button again to start play again. NOTE · When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it. · Disc #10 is displayed as "0". 2CAUTION · When the faceplate has been dropped open, it might interfere with the shift lever or something else. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: -- 18 -- Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point. NOTE Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. The display of the track number changes continuously as the next track is being selected. When the track has been selected, play starts. The selected track number blinks in the display as it is being played. NOTE (For disc changers) When all the tracks on a certain disc have been played using the random play function, the next disc on the changer starts playing (with the random play function still turned on). · The track scan function is cancelled when you stop playing a disc. · The track scan function only scans each track on a disc once. -- 20 -- 2 To change the track being heard, press the ¢ button. Another track is selected and played. NOTE Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. The factory default is manual scrolling. The random play function is cancelled when you stop playing a disc. To scroll manually: 1 Press the DISP button to display the disc title or the track title. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. Manual/Automatic scroll switching: 1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. 1 Press the M. RDM button to switch the magazine random play function on and off. "MRDM ON" is displayed when magazine random play is turned on. The display of the disc and track numbers change continuously as the next track is being selected. [. . . ] If skipping happens at the same place when the car is stopped, something with the CD is wrong. Press the reset button on the unit (see p. 4). The sound skips. Something is touching the disc changer. The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. [. . . ]