User manual KENWOOD KMM-BT35

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 23/9/2014 5:20:38 PM For Israel Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] Refer to the instruction manual of the connected phone for details. € This unit also supports the intelligent personal assistant function of iPhone. Settings in memory Store a contact in memory You can store up to 6 contacts into the number buttons (1 to 6). 2 Turn the volume knob to select [CALL HISTORY], [PHONE BOOK], or [NUMBER DIAL], then press the knob. 3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone number. To erase a contact from the preset memory, select [NUMBER DIAL] in step 2 and store a blank number. delete a contact to enter Bluetooth mode. 1 Press 2 Turn the volume knob to select [CALL HISTORY], then press the knob. 3 Turn the volume knob to select a contact. 4 Press and hold the volume knob to enter delete mode. 5 Turn the volume knob to select [DELETE ONE] or [DELETE ALL], then press the knob. DELETE ONE: Selected name or phone number in step 3 is deleted. DELETE ALL: All names or phone numbers in [CALL HISTORY] in step 2 is deleted. 6 Turn the volume knob to select [YES], then press the knob. € To return to the previous setting item, press . € Not applicable for mobile phone that supports PBAP. Make a call from memory to enter Bluetooth mode. Indd 11 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 11 15/8/2014 4:04:46 PM BLUETOOTH® Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to make a selection (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or follow the instructions stated on the selected item. To return to the previous setting item, press Bluetooth test mode You can check the connectivity of the supported profile between the Bluetooth device and the unit. [. . . ] Metal parts such as the heat sink and enclosure become hot. € Do not connect the [ wires of speakers to the car chassis or Ground wire (black), or connect them in parallel. € Mount the unit at an angle of less than 30º. € If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key. [. . . ]