User manual KENWOOD KRC-2000A

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Release your finger to play the disc at the point. NOTE Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes. -- 16 -- Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. Starting the Track Scan: Press the SCAN button. "TSCN/SCAN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the SCAN button again to stop the scan and keep on listening to a track normally. NOTE · The track scan function is cancelled when you eject the disc. · The track scan function only scans each track on a disc once. Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Scan (Function of disc changers) Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D. SCN button. "DSCN ON" is displayed and the first 10 seconds of each disc are played, in the order in which they are loaded on the changer. The 4 button moves the cursor to the left, and the ¢ button to the right. · The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. · Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. · Pressing the reset button does not erase the disc names stored in a disc changer. 4 Press the DISC+ or DISC­ button to display the desired character. Characters that can be displayed are as follows. Alphabet (upper case) : A ~ Z Numerals and symbols : 0~9 @ " ` ` % & * + - = , . / \ < > [ ] NOTE The operation and characters that can be entered may change as listed below, depending on the unit that is connected. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC­ button to display the desired character. [. . . ] The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something is wrong with the CD. Press the reset button on the unit (see page 4). The sound skips. Something is touching the disc changer. [. . . ]