User manual KENWOOD KRC-265S

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Play starts at the beginning of the displayed track number. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON w Track/Disc Repeat OFF "TREP/REP ON" is displayed and the track number blinks in the display when track repeat is on. "DREP ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE Repeat play is cancelled when you eject the disc. Disc Search Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE Starting the Track Scan: Press the SCAN button. "TSCN/SCAN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. · The track scan function is cancelled when you eject the disc. · This procedure is not to be used to store the disc and track titles for MDs that you record. 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. You can also move the cursor left or right by pressing the TRACK+ or TRACK­ buttons, respectively, on the remote control. · The number of discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. · Discs are identified by their total length and number of tracks. If you play another CD that happens to have exactly the same specifications as another CD whose name is stored, the wrong name will be displayed for it. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to enter the changes. · Pressing the reset button does not erase the disc names stored in a disc changer. 4 Press the DISC+ or DISC­ button to display the desired character. NOTE The operation and characters that can be entered may change as listed below, depending on the unit that is connected. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numerals, you can choose the following characters: /, +, ­, *, =, <, >, [ and ] 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 8 characters for each name. 6 Press either the NAME. S button on the main unit or the OK button on the remote control. -- 20 -- Menu settings Switching Display for Discs Switch the display that appears whilst discs are playing. 4 MENU FM ¢ Switching Display for Discs: Each time you press the CLK button, the display during disc play switches as follows. Track time LOUD SCAN B. S/RDM REP D. SCN M. RDM EJECT MENU SRC PWR OFF / PTY DISC Disc name (DNPS) Disc title (Units featuring CD text/MD only) Track title (Units featuring CD text/MD only) Clock NOTE TI VOL ADJ CLK NAME. S DISC AM · You can give names to discs through the presetting disc name function (see p. [. . . ] The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something is wrong with the CD. Press the reset button on the unit (see page 4). The sound skips. Something is touching the disc changer. [. . . ]