User manual KENWOOD KRF-V5080D

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-806 KRF-V5080D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this model has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] • The source indication changes to “MD”. • To return to the original indication, repeat procedure 2. Input level adjustment (analog sources only) If the input level of an analog source signal is too high, the CLIP indicator will blink to indicate the source signal. Adjust the input level. Setting the speaker status 1 Use the INPUT SELECTOR knob to select the source of which the input level you want to adjust. • You can store a separate input level for each input source. 2 Press the SOUND key repeatedly until the “INPUT” indication appears. 3 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the input level. Press the SPEAKERS ON/OFF key to switch the speaker on or off. The speaker indicator lights up. • The input level may be adjusted to any one of three settings: 0dB, -3dB, and -6dB. (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. 18 EN *5439/16-22/EN 18 04. 1. 22, 1:19 PM Normal playback Listening to a source component Adjusting the sound SPEAKERS ON/OFF ACTIVE EQ VOLUME CONTROL VOLUME CONTROL INPUT SELECTOR PHONES MULTI CONTROL MUTE Input Selector VOLUME BASS BOOST MUTE LOUDNESS MULTI CONTROL ACTIVE EQ TONE VOLUME 1 Use the INPUT SELECTOR knob or keys to select the source you want to listen to. The input sources change as shown below: 1 2 3 4 5 6 7 “TUNER” “CD/DVD” “TAPE” or “MD” “VIDEO1” “VIDEO2” “DVD/6CH” (VR-806 : “DVD”) “AUX” Adjusting the Tone (remote control only) You can adjust the sound quality when this model is in the PCM stereo and analog stereo mode. 1 Press the TONE key to select the TONE mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select TONE ON/OFF. 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME keys to adjust the volume. 3 When in TONE ON selection, press the TONE key for the following displays. BASS : Select this to adjust the low frequency range. TREB : Select this to adjust the high frequency range. 4 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the sound quality. • The bass and treble levels are adjustable from -10 to +10 in 2 step increments. Once-touch low frequency emphasis (Bass Boost) (remote control only) You can adjust the sound quality when this model is in the PCM stereo and analog stereo modes. • Press the key once to select the maximum (+10) low frequency emphasis setting. • TONE will automatically be turned ON. • This key does not function when this model is in the sound quality or ambience effects adjustment mode. £~• Switching back to the previous setting Press the BASS BOOST key again. 19 EN *5439/16-22/EN 19 04. 1. 22, 1:19 PM Normal playback Recording Recording audio (analog sources) Adjusting the Loudness mode (remote control only) You can adjust the Loudness function which controls the low volume settings to maintain the music’s richness. The adjustment can be made when this model is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the Loudness setting ON. To cancel Press the LOUDNESS key again so that the “LOUDNESS” indicator goes off. INPUT SELECTOR Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than “MD/TAPE”) you want to record. [. . . ] 550 mV / 15 kΩ Output level / impedance TAPE REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 mV / 1 kΩ PRE OUT (SUBWOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 V / 2. 2 kΩ Tone control BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]