User manual KENWOOD KSC-W1200T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KENWOOD KSC-W1200T. We hope that this KENWOOD KSC-W1200T user guide will be useful to you.

Lastmanuals help download the user guide KENWOOD KSC-W1200T.


Mode d'emploi KENWOOD KSC-W1200T
Download
Manual abstract: user guide KENWOOD KSC-W1200T

Detailed instructions for use are in the User's Guide.

[. . . ] • Do not install the speakers in locations which may be subject to water or moisture. • Do not install the speakers in unstable locations or locations subject to dust. • If the fuse blows, after checking to see if the wiring cord has shorted, be sure to replace with the stipulated size (amperage) fuse as displayed on the fuse box. (Using fuses other than the stipulated size can cause fires. ) Check the display! [. . . ] Part Name Outside Shape Quantity 4 4 2 Remote control 1 (5 m / 16 ft) 10-pin connector cord 2 (5 m / 16 ft) Speaker cord 3 (4. 3 m/ 14 ft) 4 Fixture A 5 Fixture B Tapping screw 6 (ø 5 × 16 mm) Machine screw 7 (M4 × 5 mm) Machine screw 8 (M3 × 8 mm) Hook-and-loop fastener 9 (Double-side adhesive/ for Remote control) 1 Connection Caution: Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the correct wirings again. After checking, connect the wire from the negative terminal of the battery. ■ Terminals of Subwoofer POWER/SPEAKER INPUT terminal REMOTE terminal ENGLISH ■ Connecting the remote control unit 1 Remote control Connect with the lock part of remote control jack facing down. Lock part Lights in blue. When the power turns ON, the illumination lights. Notes: • Be sure to connect the supplied remote control unit. • If the cord is not connected properly, the illumination on the remote control unit do not light up. • Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result. English 3 B61-1376_1_EN_00_KSC-W1200T. indd 3 12. 11. 30 10:32:53 AM Connection Speaker input connection p p Connect the subwoofer to the front speaker or rear speaker output cords of the center unit. Notes: • Read the instruction manuals for the connected components such as the center unit as well as this instruction manual. • When the center unit incorporates a DSP, do not connect to the rear output, as the low-frequency reproduction effect may be attenuated due to the DSP effect. ■ Examples The following shows a typical connection for effective car stereo enjoyment. Connect your system by referring to the example. Front or rear speaker Center unit Left Right Caution: Do not distribute the cords in the paths where they may be caught by a vehicle part or damaged. Be careful so that the connected cords do not get in between the speaker unit and fixtures A 4. 2 6 Tapping screw x 4 Caution: This por tion becomes slightly hotter than other portions because it functions as the radiator of the heat generated by the amplifier. Attach the fixtures A 4 to the speaker unit securely using the machine screws 7. Be careful so that the connected cords do not get in between the speaker unit and fixtures A 4. 2 6 Tapping screw x 4 Drill four pilot holes for ø 3. 6 mm screws. Drill four pilot holes for ø 3. 6 mm screws. Drill the pilot holes for ø 3. 6 mm screws on the sheet metal section of the vehicle , and attach the speaker unit to the vehicle using the tapping screws 6. Drill the pilot holes for ø 3. 6 mm screws on the sheet metal section of the vehicle , and attach the speaker unit to the vehicle using the tapping screws 6. 6 English B61-1376_1_EN_00_KSC-W1200T. indd 6 12. 11. 30 10:33:00 AM ■ Installing the remote control unit Install the remote control unit on the vehicle by the provided hook-and-loop fastener. 1 Remote control (Rear panel) Vehicle Caution: Install the remote control unit in a position that does not come in the way of driving operations. Avoid installing it in a place subject to direct sunlight or direct hot wind from the heater. Otherwise, the product may be degraded and a fire hazard may result. Remove dirt from the installation position before attaching the hook-and-loop fastener. 9 Hook-and-loop fastener (Harder surface) 9 Hook-and-loop fastener (Softer surface) Fuse exchange g Exchange with the specified capacity fuse. Caution: Be sure to replace with same capacity (amperage) as displayed on the fuse. This product is 10A. ■ Removal Fuse Cover ■ Insertion Replacement fuse 10 A 10 A Fuse holder 1 Open the cover. 2 Grasp the fuse and pull up. 1 Insert the fuse gently into the fuse holder and push in all the way with your finger. 2 Close the cover. Operation p ■ Name of each part (Remote control ) Illumination When the power turns ON, the illumination lights. ■ Adjusting the sound (Remote control operation) 1 Turn the FREQUENCY control knob to adjust the cut-off frequency (frequencies higher than this frequency are cut off). Turn the FREQUENCY control knob to adjust the balance between the bass from the rear speakers and the bass from this unit as desired. [. . . ] • Connect the cords correctly by referring to the connection example (on page 4, 5). • Attach the grounding terminal to the metallic section of the vehicle (not a coated surface) by tightly screwing it. • Plug the cord into the REMOTE terminal. • Insert the connector all the way in. Sound quality is bad (sound is distorted). ENGLISH Remote control does not work. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KSC-W1200T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KSC-W1200T will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag