User manual KENWOOD KSC-W800 SERVICE MANUAL

[. . . ] If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. Make sure not to get your fingers caught between the faceplate and the unit. Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Putting a station with good reception in the memory automatically. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. Enter Menu mode Press the [MENU] button for at least 1 second. When 6 stations that can be received are put in the memory Auto Memory Entry closes. When the <AF (Alternative Frequency)> (page 24) is ON, only RDS stations are put in the memory. When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren't put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren't put in the memory. Select the frequency to put in the memory Press the [4] or [¢] button. Put the frequency in the memory Press the desired [1] -- [6] button for at least 2 seconds. the preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] -- [6] button. Display examples: Display Disc player "CD2" CD player "DISC CH" CD changer / MD changer The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. If the remote with number buttons is used as optional accessories, a song you'd like to listen to can directly be selected with the operation below. Release your finger to play the disc at that point. Release your finger to play the disc at that point. Enter Menu mode Press the [MENU] button for at least 1 second. Example: When you want to set the beep sound select the "Beep" display. You can continue by returning to step 2 and setting other items. exit Menu mode Press the [MENU] button. When other items that are applicable to the basic operation method above are displayed afterwards their setting content chart is entered. Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. [. . . ] 64 The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button. Turn Random Play or other functions OFF. [. . . ]