User manual KENWOOD KTC-V301E

[. . . ] Before use Operations ­CD Receiver­ Tuning Tuning Mode Receive Mode Preset Memory Preset Tuning Auto Memory Entry Switching Display Text Scroll In HD Radio source What is HD Radio Technology? 2 3 4 HD Radio technology enables broadcasters to transmit a digital signal with its analog signal using existing frequency allocations for FM and AM stations. Quality of broadcast is improved to the level of music CD in digital FM and that of analog FM in digital AM. Moreover, if receiving condition is good, you can listen to programs in stereo with the digital AM broadcast. Digital FM of Supplemental Audio Services can send up to 7 channels of the Supplemental Program Audio other than the Main Program Audio. / · Main Program Audio (hereafter called Main channel) · Supplemental Program Audio (hereafter called Sub channel) Operations ­DVD monitor­ Functions While Displaying the Control Screen Receive mode Auto Memory Manual Memory 8 Analog AM Analog AM (HD AM band) Digital AM Digital AM Main Program Audio (Main channel) Digital FM Digital FM-1ch Digital FM-2ch Digital FM-8ch Digital FM . . . Accessories/ Installation Procedure Installation Troubleshooting Guide Specifications 11 12 13 14 Analog FM Analog FM Analog FM (HD FM band) Supplemental Program Audio (Sub channel) Digital broadcasting can send other information than audio, so you can display data such as title of music. HD RadioTM Technology Manufactured Under License From iBiquity Digital Corp. [. . . ] · Some of the models have the following displays when the Main channel and Sub channel are switched. - "Main"/"Primary"/"PRI": When it is switched to the Main channel Digital Analog "Digital" "Analog" 4 Exit Receive mode Press the [MENU] button. 5 Exit Menu mode 4| KTC-V301E Preset Memory Putting the frequency and channel in the memory. Auto Memory Entry Putting a station with good reception in the memory automatically. 1 Select the band Press the [FM] or [AM] button. 1 Select the band for Auto Memory Entry Press the [FM] or [AM] button. 2 Select the frequency and channel to put in the memory Press the [4] or [¢] button. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. Save 6 stations with the best reception in the memory and close Auto Memory Entry. 3 Put the frequency and channel in the memory Press the desired [1] -- [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] -- [6] button. / · Sub channel of Digital FM cannot be registered. Preset Tuning Calling up the frequency and channel in the memory. 1 Select the band Press the [FM] or [AM] button. 2 Call up the frequency and channel Press the desired [1] -- [6] button. / · "Linking" will be displayed for few seconds until it is received. · When <Receive Mode> (page 4) is set to Digital or Analog, it cannot be received if the setting is differed from the preset. English | 5 Operations ­CD Receiver­ Switching Display When you are listening to an HD Radio station, you can switch over the display information as follows. For operations, see the <Switching Display>/ <Display Mode Switching>/ <Text Display Switching> page of the instruction manual of your control unit. Text Scroll Scrolls the display title. For operations, see the CD features of <Text Scroll> in the instruction manual of your control unit. / · What is displayed may partly depend on control unit to be connected. HD Radio mode Information Station Name (8) Display "Station Name"/ "NAME"/ "ST NAME" Song title/ Artist name/ Album name/ "Title"/ "TITLE" Genre/ Detailed station name (128) Receive Frequency "Frequency"/ "FREQ" The number in the ( ) indicates the maximum number of displayed characters. When a current receiving station dose not send text information, the frequency is displayed. The Station name or Song title during reception of the Digital FM broadcasting displays the channel information as follows. 1Digital AM "(Station name) HD" "(Song title/ Artist name /. . . )" 1Digital FM "(Station name) HD" "(Song title/ Artist name /. . . )" 2Digital FM-1 "(Station name) HD1" "(Song title/ Artist name /. . . )" 3Digital FM-2 "(Station name) HD2" "(Song title/ Artist name /. . . )" · 1: When the Main channel is received · 2: The sub channel is available in Main channel which is received. DDX812, DDX712, DNX8120, DNX7120 Selects the Call Letter (8), Title (32), Artist (32), Album (32), Genre (32), or Station Name (32). KVT-512, DDX512, DNX5120, DNX512EX Changes the display Call letter (8), Station Name (94), Song Title (80), Artist Name (80), Album Name (80), to Genre Name (32). The number in the ( ) indicates the maximum number of displayed characters. Receive mode Sets the radio broadcasts receive mode. 1 Display the source control screen 2 Display the Receive mode screen Touch the [RCV] button. 3 Select the receive mode [2], [3] The Receive mode switches in the following order. Display "Auto" "Digital" "Analog" Setting Automatically tunes to analog broadcast when receiving the digital broadcast is impossible. Analog broadcasts only. 4 Exit Receive mode Touch the [ ] button. English | 9 Operations ­DVD monitor­ Auto Memory Stores stations with good reception in memory automatically. 1 Display the source control screen 2 Select a band you wish to store in memory Touch the [HD FM] or [HD AM] button. 3 Select the Auto Memory mode Touch the [AME] button. 4 Start Auto Memory Touch the [4] or [¢] button. Save six stations with the best reception in the memory and close Auto Memory Entry. Manual Memory Stores the current receiving station in memory. [. . . ] See the section on <Connecting Wires to Terminals>. The preset broadcast station is not transmitting in the mode that was set with <Receive Mode>. Please set <Receive Mode> to "Auto". It switches between the Digital broadcasting and Analog broadcasting too often. [. . . ]