User manual KENWOOD KVT-747DVD

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KENWOOD KVT-747DVD. We hope that this KENWOOD KVT-747DVD user guide will be useful to you.

Lastmanuals help download the user guide KENWOOD KVT-747DVD.


KENWOOD KVT-747DVD : Download the complete user guide (1315 Ko)

Manual abstract: user guide KENWOOD KVT-747DVD

Detailed instructions for use are in the User's Guide.

[. . . ] Always connect those wires to the power source running through the fuse box. € Do not cut out the fuse from the ignition wire (red) and the battery wire (yellow). 2CAUTION • If the power is not turned ON (or it is ON, but will be OFF immediately), the speaker wire may have a short-circuit or touched the chasis of the vehicle and the protection function may have been activated. € If your car’s ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. [. . . ] 30R Optical output (KVT-817DVD only) Monitor unit An Optical cable (Accessory 3) is fixed with a chassis using harness band (Accessory ^). (KVT-817DVD only) (Black) Connect to the vehicle's parking brake detection switch harness using the supplied relay connector. Parking sensor wire (Green) PRK SW For the sake of safety, be sure to connect the parking sensor. accessory 4 To vehicle's reverse lamp harness To car light control switch Reverse sensor wire (Pink) REVERSE Dimmer control wire (Orange/White) ILLUMI Steering remote control input To Steering remote (Light Blue/Yellow) REMO. CONT Car fuse box (Main fuse) Ignition key switch ACC A B C Ignition wire (Red) ACC A B Battery wire (Yellow) BATT (5A) Car fuse box Ground wire (Black) - (To car chassis) C + AV OUTPUT Receiver unit (front side) PRE OUTPUT R-CAM V-IN VIDEO CENTER SUB [MONO] REAR L R FRONT L POWER R Battery Antenna Cord VIDEO AV INPUT 2 L AV INPUT 1 L R R L R FM/AM antenna input Accessory 5 FM /AM ANTENNA VIDEO To Subwoofer system Accessory % (KVT-817DVD only) Accessory 1 Ground wire (Black) - (To car chassis) Battery wire (Yellow) (10A) C B Connect to the terminal that is grounded when either the Mute wire (Brown) telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the Motor antenna control wire (Blue) control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power Power control wire (Blue/White) control terminal. " terminal of the amplifier having the external External amplifier control wire (Pink/Black) amp control function. (Optional) Accessory 3 (KVT-817DVD only) (Green) An Optical cable (Accessory 3) is fixed with a chassis using harness band (Accessory ^). (KVT-817DVD only) Connection cable (Included in the disc changer) Receiver unit (rear side) Accessory 2 TV tuner (Optional) TV ANTENNA INPUT FRONT L White/Black White + Navigation System (Optional) To front left speaker FRONT R Gray/Black Gray + To front right speaker If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. rEAR L Green/Black Green + To rear left speaker REAR R Purple/Black Purple + To rear right speaker B54-4464-00_00_English. Indd 5 TO NAVIGATION I/F TO TV TUNER I/F OPTICAL IN TO MONITOR UNIT TO MONITOR I/F TO 5L I/F Optical input (KVT-817DVD only) Connection cable (Included in the Navigation system) Connection cable (Included in the TV tuner) English | 5 05. 20 2:44:52 PM Connection for AV Equipments (KVT-817DVD) AV OUTPUT VIDEO FM /AM ANTENNA VIDEO AV INPUT 2 L AV INPUT 1 L R R L R-CAM V-IN VIDEO CENTER SUB [MONO] PRE OUTPUT REAR L R FRONT L POWER R R ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer (MONO) Preout You can use Accessory % when to connect the subwoofer system input terminals is stereo. – Center Preout ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input 1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual input 2 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) 6 | English B54-4464-00_00_English. 20 2:44:53 PM Connection for AV Equipments (KVT-717DVD/KVT-747DVD) AV OUTPUT VIDEO FM /AM ANTENNA VIDEO AV INPUT 2 L AV INPUT 1 L R R L R-CAM V-IN VIDEO SUB L R PRE OUTPUT REAR L R FRONT L POWER R R ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input 1 (KVT-717DVD) Audio/Visual input (KVT-747DVD) • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual input 2 (KVT-717DVD only) • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) English | 7 B54-4464-00_00_English. 20 2:44:54 PM Installation for Monitor Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory 6 Make sure that the unit is installed securely in place. Attach the installation brackets 0 to the sides of the hideaway unit using the sems bolts 8. [. . . ] Use a flat-blade screwdriver or pliers, and bend each accessory tab into the hole of installation bracket to fix the bracket. Installation of Remote control unit ■ Install the remote control unit holder (Accessory $). To prevent the Remote control unit from dropping down under your foot, install it using the Remote control unit holder. If the Remote control unit drops down under driving pedals, it will interfere with your driving and may result in a traffic accident. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KENWOOD KVT-747DVD

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KENWOOD KVT-747DVD will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag