User manual KENWOOD KVT-839DVD

[. . . ] € If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating. € Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps on the ends of the unconnected wires or the terminals. [. . . ] Parking sensor wire (Light Green) PRK SW Battery wire (Yellow) FUSE ( 10A ) Ground wire (Black) - (To car chassis) A For the sake of safety, be sure to connect the parking sensor. To vehicle's reverse lamp harness Reverse sensor wire (Purple/White) To car light control switch Dimmer control wire (Orange/White) Steering remote control input (Light Blue/Yellow) To steering remote Connect to the terminal that is grounded when either the telephone rings or during conversation. To connect the Kenwood navigation system, consult your navigation manual. Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna. When using the optional power amplifier, connect to its power control terminal. " terminal of the amplifier having the external amp control function. Mute wire (Brown) Motor antenna control wire (Blue) Power control wire (Blue/White) External amplifier control wire (Pink/Black) If no connections are made, do not let the cable come out from the tab. 1 5:26:20 PM Receiver unit Accessory @ Accessory 3 The cable (Accessory 3) is fixed with a chassis using harness band (Accessory @). receiver unit FM/AM antenna input Wiring harness (Accessory 1) REVERSE FRONT L White/Black White + ILLUMI To front left speaker FRONT R REMO. CONT Gray/Black Gray + To front right speaker MUTE REAR L Green/Black Green + To rear left speaker ANT CONT REAR R Purple/Black Purple + P. CONT If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box. 1 5:26:22 PM System Connection RELAY 2 RELAY 1 To Relay Box Accessory # Receiver unit ■ Front Preout • Audio left output (White) • Audio right output (Red) ■ Rear Preout • Audio left output (White) • Audio right output (Red) ■ Subwoofer Preout • Audio left output (White) • Audio right output (Red) ■ Audio/Visual input 2 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Audio/Visual input 1 • Visual input (Yellow) • Audio left input (White) • Audio right input (Red) ■ Rear View Camera Input • Visual input (Yellow) ■ Audio/Visual Output • Visual output (Yellow) • Audio left output (White) • Audio right output (Red) 6 | KVT-819DVD/KVT-839DVD B54-4552-00_00_English. Monitor/Player unit USB terminal (iPod) USB terminal iPod Receiver unit Accessory 3 Connection cable (Included in the Disc changer) Connection cable (Included in the Navigation System) Disc Changer etc. 1 5:26:23 PM Installation for Monitor/Player Unit Firewall or metal support Screw (M4X8) (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Self-tapping screw (commercially available) Metal mounting strap (commercially available) Accessory 5 Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Attach the installation brackets 9 to the sides of the receiver unit using the sems bolts 7. [. . . ]  • Be careful to avoid injury from the catch pins on the removal tool. Pull the unit all the way out with your hands, being careful not to drop it. (M5x7mm) Screws (included in audio unit package) Screws (included in audio unit package) Audio unit or others ⁄ • Do not use your own screws. [. . . ]