User manual KENWOOD RC2000

[. . . ] INSTRUCTION MANUAL MOBILE CONTROLLER RC-2000 MOBILE CONTROLLER RC-2000 KENWOOD CORPORATION © B62-1292-10 (M) 09 08 07 06 05 04 03 02 01 SUPPLIED ACCESSORIES Accessory RC-2000 Mobile Controller DC power cable (7 m/ 23. 1 ft) Microphone extension cable (5 m/ 16. 5 ft) Speaker extension cable (5 m/ 16. 5 ft) RC-2000 cable with modular plugs (5 m/ 16. 5 ft) RC-2000 bracket1 Part Number ­ E30-3406-XX E30-3407-XX E30-3408-XX E30-3409-XX Quantity 1 1 1 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 CONVENTIONS FOLLOWED IN THIS MANUAL The writing conventions described below have been followed to simplify instructions and avoid unnecessary repetition. {page XX} What to do Press and release KEY. Press and hold KEY for 1 second or longer. Press KEY1 momentarily, release KEY1, then press KEY2. [. . . ] "ATT" appears on the display when this function is ON. "P/A" appears on the display when both "PRE" and "ATT" are ON. Press to play back the message which has been recorded in channel 1. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH1. CH2 ANT1/ ANT2/ ANT When operating on the HF ~ 50 MHz band, "ANT1" or "ANT2" appears. "ANT" appears when operating on the 144 MHz ~ 1. 2 GHz bands. Press to select another antenna when operating on the HF ~ 50 MHz band. Press to play back the message which has been recorded in channel 2. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH2. CH3 P. C. T. Press to switch the P. C. T. (Packet Cluster Tune) function ON or OFF {page 37, TS-2000 page 53}. Press to play back the message which has been recorded in channel 3. When [REC] is pressed and the transceiver is standing by for recording, press this key to start recording in CH3. SATL Press to switch the Satellite mode ON or OFF {page 31, TS-2000 page 53}. 19 GROUP B­3 SCAN Press to start or stop various Scan functions. GROUP B­4 DUAL Press to switch the sub-receiver ON or OFF. AUTO Press to switch the Auto mode selection function ON or OFF. When it is active, "A" appears on the display. CTRL Press to move the Control band to another receiver. The frequency display of the Control band appears in a large font. If the same band is selected for the TX band and Control band, only "PTT" appears on the display. SG SEL Press to enter the Scan Group select mode. Select your desired memory group numbers using the [b]/ [a] key, or by turning or pressing the MULTI/ CH control, then press [SEL] to toggle the selection. The selected group numbers are highlighted. You can also press [ALL] to deselect all the group numbers. Press [OK] to save the setting or [CLR] to cancel the selection. LOCK Press to lock all the keys and controls of the RC-2000. Press and hold to unlock the keys and controls of the RC-2000. Q. M Press to recall the Quick Memory channel. "Qnn" appears, indicating which Quick Memory channel is recalled (where "nn" = 00 ~ 09). Turn the MULTI/ CH control to scroll through the Quick Memory channels. VISUAL Press to activate the Visual Scan function {page 39, TS-2000 page 70}. METER Press to change the meter mode between SWR, ALC, and COMP. Press and hold to toggle the meter mode between PWR and SWR/ ALC/ COMP. 20 GROUP C KEYS The available group C keys change, depending on the current operating mode. [. . . ] The RC-2000 panel automatically detects the TM-D700A/E transceiver and will operate the same as the original TM-D700A/E panel. DEMONSTRATION MODE The RC-2000 mobile controller and the transceiver can be configured to enter demonstration mode for display purposes. To enter the demonstration mode: 54 NOTICES TO THE USER One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. [. . . ]