User manual KENWOOD TK-3302

[. . . ] contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains lead. We are grateful you have chosen Kenwood for your personal moble applcatons. [. . . ] S / A / <B / C> / keys Press to activate their programmable functions {page 4}. PTT switch Press this switch, then speak into the microphone to call a station. Power input connector Connect the DC Power Cable to this connector. The display shows the channel number and the 2 dots show various modes of operation. The left and right dots on the display can be programmed to indicate specific modes of operation, as listed below. The , , , , S, A, <B, C>, and keys can be programmed with the functions listed below. Ask your dealer for details on these functions. Direct Zone Channel can be programmed only on the S, A, <B, C>, and Emergency can be programmed only on the key. If the Transceiver Password function is programmed, "PS" will appear on the display when the power is turned ON. 2 Press C> to accept the entered digit and move to the next digit. When using a keypad, simply enter the password digits and proceed to step 3. When the transceiver receives a call containing a stun code, the transceiver becomes disabled. The stun code is cancelled when the transceiver receives a call with a revive code. Your dealer may have programmed QT or DQT signaling on your transceiver channels. A QT tone/ DQT code is a sub-audible tone/code which allows you to ignore (not hear) calls from other parties who are using the same channel. Your dealer may also program several types of optional signaling for your transceiver channels. 5-tone Signaling: Refer to "5-TONE SIGNALING" on page 0. DTMF Signaling: DTMF Signaling opens the squelch only when the transceiver receives a call containing a matching DTMF code. Up to 6 OST pairs can be pre-programmed by your dealer. A Selcall is a voice call to a particular station or to a group of stations. n Transmitting 1 Select your desired zone and channel. N Receiving If enabled by your dealer, an alert tone will sound and the LED will blink when a Selcall has been received. [. . . ] Depending on the delay time programmed into your transceiver, the length of time you must hold the Emergency key will vary. â· When the transceiver enters Emergency mode, the transceiver will change to the Emergency channel and begin transmitting based on how the transceiver is set up. â· If the Emergency mode completes the preset number of cycles, Emergency mode will automatically end and the transceiver will return to normal. N Lone Worker Mode Lone Worker Mode is a safety feature built into the transceiver. [. . . ]