User manual KENWOOD TM-281E

[. . . ] TM-281A/ TM-281E 144 MHz FM TRANSCEIVER INSTRUCTION MANUAL ÉMETTEUR-RÉCEPTEUR FM 144 MHz MODE D'EMPLOI TRANCEPTOR FM 144 MHz MANUAL DE INSTRUCCIONES © B62-2347-20 (K, E, M2) 09 08 07 06 05 04 03 02 144 MHz FM TRANSCEIVER TM-281A 144 MHz FM TRANSCEIVER TM-281E NOTIFICATION This equipment complies with the essential requirements of Directive 1999/5/EC. The use of the warning symbol means the equipment is subject to restrictions of use in certain countries. This equipment requires a licence and is intended for use in the countries as below. AT BE DK FI FR DE GR IS IE IT LI LU NL NO PT ES SE CH GB CY CZ EE HU LV LT MT PL SK SI BG RO ISO3166 Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. [. . . ] · Rather than using the Tuning control, you can use the Mic keypad (keypad models only) to enter alphanumeric characters {page 64}. 32 MEMORY CHANNEL TRANSFER MEMORY \ VFO TRANSFER After retrieving frequencies and associated data from Memory Recall Mode, you can copy the data to the VFO. This function is useful, for example, when the frequency you want to monitor is near the frequency stored in a Memory Channel. 1 Press [MR], then turn the Tuning control or press Mic [UP]/[DWN] to recall the desired Memory Channel. · Alternatively, press [CALL] to select the Call Channel. CHANNEL \ CHANNEL TRANSFER You can copy channel information from one Memory Channel to another. This function is useful when storing frequencies and associated data that you temporarily change in Memory Recall Mode. 1 Press [MR], then turn the Tuning control or press Mic [UP]/[DWN] to recall the desired Memory Channel. 2 Press [F]. 2 Press [F], [VFO] to copy the Memory Channel data to the VFO. Note: On odd-split channels, the above operation copies only the reception frequency to the VFO (not the transmission frequency). To copy the transmit frequency of an odd-split channel, press [REV] before performing the transfer. You can also transfer the Program Scan memory channels (L0/U0 ~ L2/U2), the Priority Channel (Pr), and the Weather Alert Channel (AL) (K market models only) to the VFO. Lockout status and Memory Names are not copied from a Memory Channel to the VFO. 7 3 Select the Memory Channel where you would like the data copied by using the Tuning control or pressing Mic [UP]/[DWN]. 4 Press [MR]. 33 The tables below illustrate how data is transferred between Memory Channels. Channel 01 ~ 199 Receive frequency Transmit frequency Tone frequency Offset direction CTCSS frequency DCS code Tone/ CTCSS/ DCS ON/ OFF status Offset frequency Reverse ON Frequency step size Memory Channel name1 Memory Channel Lockout ON/ OFF Narrow FM ON/ OFF Channel 01 ~ 199 Receive frequency Transmit frequency Tone frequency Offset direction CTCSS frequency DCS code Tone/ CTCSS/ DCS ON/ OFF status Offset frequency Reverse ON Frequency step size Memory Channel name1 Memory Channel Lockout ON/ OFF Narrow FM ON/ OFF Channel 01 ~ 199 Receive frequency Transmit frequency Tone frequency Offset direction CTCSS frequency DCS code Tone/ CTCSS/ DCS ON/ OFF status Offset frequency Reverse ON Frequency step size Memory Channel name Memory Channel Lockout ON Narrow FM ON/ OFF 1 2 1 L0/U0 L2/U2, Pr, AL 2 Receive frequency Transmit frequency Tone frequency Offset direction CTCSS frequency DCS code Tone/ CTCSS/ DCS ON/ OFF status Offset frequency Reverse ON Frequency step size Memory Channel name1 Memory Channel Lockout OFF Narrow FM ON/ OFF 7 When "100" is selected in Menu No. 15 (M. CH). The AL Channel is available for K market models only. Note: When transferring an odd-split channel, the Reverse status, Offset direction, and Offset frequency are not transferred {pages 23, 26}. Tone, CTCSS, and DCS are automatically turned OFF when transferring data to the Weather Alert Channel (AL). 34 CALL CHANNEL Call Channel default settings: · On K and M market models, pressing [CALL] changes the transceiver to the Call Channel. · On E market models, pressing [CALL] causes the transceiver to transmit a 1750 Hz tone {page 25}. REPROGRAMMING THE CALL CHANNEL 1 Select your desired frequency and related data (Tone, CTCSS, DCS, or offset direction, etc. ). · When you program the Call Channel as an odd-split channel, select a reception frequency first. 2 Press [F]. · A Memory Channel number appears and blinks. The Call Channel can be recalled instantly no matter what frequency the transceiver is operating on. For instance, you may use the Call Channel as an emergency channel within your group. In this case, Call Scan {page 43} will be useful. The default Call Channel frequency is 144. 000 MHz. Note: Unlike Memory Channels 0 to 199, the Call Channel cannot be cleared. 3 Turn the Tuning control or press Mic [UP]/[DWN] to select the Call Channel ("C"). 4 Press [MR]. · The selected frequency and related data are stored in the Call Channel. 7 RECALLING THE CALL CHANNEL 1 Press [CALL] to recall the Call Channel. · The Call Channel frequency and "C" appear. To also store a separate transmit frequency, continue with the following steps: 5 Select the desired transmission frequency. 6 Press [F]. · To return to the previous frequency, press [CALL] again. 7 Turn the Tuning control or press Mic [UP]/[DWN] to select the Call Channel ("C"). 8 Press [MR] (1s). · The separate transmission frequency is stored in the Call Channel. 35 Note: When you recall an odd-split Call Channel, "+" and "­" appear on the display. Transmit offset status and Reverse status are not stored in an odd-split Call Channel. 4 Turn the Tuning control or press Mic [UP]/[DWN] to select the Alert Channel ("AL"). 5 Press [MR]. Weather Radio Frequencies (MHz) WX1 WX2 WX3 WX4 WX5 WX6 WX7 WEATHER ALERT (K MARKET MODELS ONLY) Any of the NOAA Weather Radio channels can be programmed to the AL memory channel of the transceiver. [. . . ] 40 Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Programmable Function (PF) Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Reset Full . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 VFO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]