User manual KENWOOD VR-707

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-707 KRF-V6070D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] Adjust the input level. (KRF-V6070D) Turning on the receiver 1 Turn on the power to the related components. 2 Turn on the power to this receiver by pressing POWER ON/ STANDBY (for VR-707) or POWER ON/OFF and ON/ STANDBY (for KRF-V6070D) key. 1 Use the INPUT SELECTOR knob to select the source of which the input level you want to adjust. · You can store a separate input level for each input source. 2 Press the SOUND key repeatedly until the "INPUT" indication appears. 3 Use the MULTI CONTROL knob or Multi %/fi keys to adjust the input level. Selecting the input mode If you have selected a component connected to the CD/DVD, VIDEO2, DVD or DVD/6CH jacks, make sure that the input mode setting is correct for the type of audio signal to be used. 8 Selecting MD/TAPE · The input level may be adjusted to any one of three settings: 0dB, -3dB, and -6dB. (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. Select the source name corresponding to the component connected to the MD/TAPE jacks. The initial factory setting is "TAPE". To change the source to "MD", follow the steps below: 1 Use the INPUT SELECTOR knob to select "TAPE". 2 Hold down the AUTO key for more than 2 seconds. · The source indication changes to "MD". · To return to the original indication, repeat procedure 2. Setting the speaker status The speaker indicator lights up. Press the SPEAKERS ON/OFF key to switch the speaker on or off. 18 EN Normal playback Listening to a source component VOLUME CONTROL Adjusting the sound SPEAKERS ON/OFF ACTIVE EQ VOLUME CONTROL INPUT SELECTOR Input Selector PHONES MULTI CONTROL MUTE Multi % / fi Tone Active EQ + ­ ­ + + ­ ¢ + + ¢ 4 VOL 4 + Mute VOL +/­ Bass Boost Loudness 1Use the INPUT SELECTOR knob or keys to select the source you want to listen to. The input sources change as shown below: 1 2 3 4 5 6 7 "AUX" "TUNER" "CD/DVD" "TAPE" or "MD" "VIDEO1" "VIDEO2" "DVD/6CH" Adjusting the Tone (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 For the remote control, press and hold the TUNER key for more than 3 seconds to switch to receiver mode. 2 Press the Tone key to select the TONE mode. 3 Use the MULTI CONTROL knob or Multi %/fi keys to select TONE ON/OFF. 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOL +/­ keys to adjust the volume. 4 When in TONE ON selection, press the Tone key for the following displays. BASS : Select this to adjust the low frequency range. TREB : Select this to adjust the high frequency range. 5 Use the MULTI CONTROL knob or Multi %/fi keys to adjust the sound quality. · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. Once-touch low frequency emphasis (Bass Boost) (remote control only) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. · Press the key once to select the maximum (+10) low frequency emphasis setting. · TONE will automatically be turned ON. [. . . ] 550 mV / 47 k DVD/6CH INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 mV / 47 k Output level / impedance TAPE REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 mV / 1 k PRE OUT (SUBWOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 V / 2. 2 k Tone control BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]