User manual KENWOOD VR-7070

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-7070 INSTRUCTION MANUAL KENWOOD CORPORATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-5343-00 00 MA (K, P) 0209 Before applying the power Units are designed for operation as follows. [. . . ] BASS : Select this to adjust the low frequency range. TREBLE : Select this to adjust the high frequency range. 5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the sound quality. SP L C SW R LFE AB MUTE CLIP COAXIAL DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED SL S SB SR · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. · The adjustment item is displayed for approximately 8 seconds. 25 EN Normal playback ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode. Press the ACTIVE EQ key for the following selections; : Effective when listening to music. (The ACTIVE EQ indicator lights up. ) 2 ACTIVE EQ CINEMA : Effective when watching a movie. (The ACTIVE EQ indicator lights up. ) 3 ACTIVE EQ TV : Effective when watching TV. (The ACTIVE EQ indicator lights up. ) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ indicator goes off. ) · "ACTIVE EQ" will scroll from right to left. · When ACTIVE EQ and SPEAKER EQ are OFF and ACTIVE EQ (MUSIC) is turned ON, SPEAKER EQ (SMALL) will turn ON automatically. · ACTIVE EQ function will not be available when REC MODE, AUTO TUNING, PRESET MEMORY or DTS-ES MATRIX is ON, and during 96kHz LPCM playback. 1 ACTIVE EQ MUSIC Listening with headphones 1 Press the A and B Speaker keys so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. SP AB LFE MUTE CLIP COAXIAL OPTICAL 6CH INPUT AUTO DETECT CINEM ACTIVE DSP M ANALOG 96kHzfs SL S SB SR · If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES SPEAKER EQ mode SPEAKER EQ function is to adjust the receiver's audio output characteristics with the speakers' characteristics which differs depending on the size of the speakers. Especially for the music sound source playback, the reproduced sound becomes more natural when adjusting the output characteristics. When activating the SPEAKER EQ function, you will be able to enjoy a more natural and dynamic sound experience even with small size speakers. Press the SPEAKER EQ key to switch the following setting; : To select a small size speaker. (The SPEAKER EQ indicator lights up. ) 2 SPEAKER EQ NORMAL : To select an average size speaker. (The SPEAKER EQ indicator lights up. ) 3 SPEAKER EQ LARGE : To select a large size speaker. (The SPEAKER EQ indicator lights up. ) 4 SPEAKER EQ OFF : The SPEAKER EQ function is turned OFF. [. . . ] 0. 7% (65 dBf input) Signal to noise ratio MONO (1 kHz, 75 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . . 75 dB (65 dBf input) STEREO (1 kHz, 67. 5 + 6. 75 kHz dev) . . . . . . . 68 dB (65 dBf input) Stereo separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 dB Selectivity (±400 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]