User manual KENWOOD VR-716A

[. . . ] Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-5341-00 00 MA (K, P, Y) 0209 Before applying the power Units are designed for operation as follows. and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Europe and U. K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] key again so that the "LOUDNESS" indicator goes off. Adjusting the TONE You can adjust the sound quality when the receiver is in the PCM stereo mode, analog stereo mode and when "THX OFF". 1 For the remote control, press and hold the TUNER key for more than 3 seconds to switch to receiver mode. · When you use the remote control, press the SUB key to switch to sub screen mode. 2 Use the MULTI CONTROL knob or MULTI %/fi keys to select TONE ON/OFF. SP L C SW R LFE AB MUTE CLIP DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS COAXIAL ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED Muting the sound The MUTE key lets you mute the sound of the speakers. Blinks SP L C SW R LFE AB MUTE CLIP OPTICAL 6CH INPUT AUTO DETECT CIN AC DS ANALOG 96kHzfs THX RDS RTY AUTO MEMO STEREO TUNED COAXIAL SL S SB SR SL S SB SR To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing VOL %/fi keys. 3 When in TONE ON selection, press the TONE key for the following displays. BASS : Select this to adjust the low frequency range. TREBLE : Select this to adjust the high frequency range. 4 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the sound quality. SP L C SW R LFE AB MUTE CLIP COAXIAL DTS. 2 AUTO REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 MANUAL REC mode : The input signal type at the moment this mode is selected is held throughout this mode. For AUTO REC mode : SP L C SW R LFE AB MUTE CLIP DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED MD/TAPE Recording a music source 1 Use the Input Selector keys to select the source (other than "MD/ TAPE") you want to record. 2 Set the MD or TAPE recorder to record. 3 Start playback, then start recording. SL S COAXIAL SB SR Recording video SP L C SW R LFE AB MUTE CLIP COAXIAL DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED 1 Use the Input selector keys to select the video source (other than "VIDEO 1") you want to record. 2 Set the video deck connected to VIDEO 1 to record. · Select the REC mode to record a digital input source. [. . . ] 75 dB (65 dBf input) STEREO (1 kHz, 67. 5 + 6. 75 kHz dev) . . . . . . . 68 dB (65 dBf input) Stereo separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 dB Selectivity (±400 kHz) (VR-716A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 dB (KRF-X9070D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]