User manual KENWOOD VRS-7200

[. . . ] AUDIO VIDEO SURROUND RECEIVER VRS-7200 INSTRUCTION MANUAL KENWOOD CORPORATION Quick Start Reference Please read the following pages so that you can enjoy the surround sound at the best condition. (These pages give shortcut explanations on how to connect the speaker system to the receiver, set up the speakers and play a source. ) "Let's play DVD video software" ^& About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name. The "AUTO" display and "MEMORY" display appear alternately. • After a few minutes, up to 40 RDS stations are preset in order from channel "01". • Stations already stored in the preset memory may be replaced by RDS stations. (i. e. , If the RDS AUTO MEMORY function detects 15 RDS stations, the stations currently preset at numbers 01~15 will be replaced by the RDS stations. ) 3 Press the ENTER key continuously for more than 2 seconds will start AUTO MEMORY. RDS functions: PTY (Program TYpe Identification) Search º Automatically tunes to a station that is currently broadcasting the specified program type (genre). PS (Program Service Name) Display Automatically displays the station name transmitted by the RDS station. RDS AUTO MEMORY function Automatically selects and stores up to 40 RDS stations in the preset memory. If fewer than 40 RDS stations have been stored in the preset memory, regular FM stations will be stored in the remaining places. Radio Text function Displays the radio text data transmitted by some RDS stations when you press the RDS DISP. There is "NO RT" if no text data is transmitted. The "RDS" indicator lights up when an RDS broadcast (signal) is received. Using the RDS DISP. (Display) key RDS DISP. TUNER Pressing the RDS DISP. key changes the contents of the display. Each press switches the display mode as follows : Note Some functions and function names may differ for certain countries and areas. 1 PS (Program Service name) display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service name) display : The station name is displayed automatically when an RDS broadcast is received. If no PS data was sent, "NO PS" is displayed. Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS Auto Memory function. 2 RT (Radio Text) display : Text data accompanying the RDS broadcast scrolls across the display. "NO RT" or "RT - - - - " is displayed if the current RDS station does not provide RT data. TUNER BAND INPUT SELECTOR 3 Frequency display : ENTER Displays the frequency of the current station. 1 Use the INPUT SELECTOR key (or the TUNER key) to select tuner as the source. 2 Use the BAND key to select the broadcast band to "FM". 29 EN Using RDS (Radio Data System) (For Europe and Australia) Tuning by Program TYpe (PTY search) This function lets you set the tuner to automatically search for stations which are currently broadcasting the type of program (genre) you want to listen to. Under certain receiving conditions, it may take more than 1 minute to complete the search. 3 Press the PTY key to start searching. Example: Searching for a Pop Music broadcast. Blinks Preparations • Execute the RDS auto memory procedure. • Set the broadcast band to FM. Program type name display Display when a station is received. Goes out PTY %/fi TUNING 1 / ¡ BAND Station name display • No sound is heard while "PTY" is blinking. [. . . ] 87. 5 MHz ~ 108 MHz Usable sensitivity (DIN at 75 Ω) MONO . . . . . . . . . . . . . . . . . . . . . . . . 1. 3 µV/ 13. 2 dBf (40 kHz dev, S/N 26 dB) STEREO . . . . . . . . . . . . . . . . 45 µV/ 42. 1 dBf (40 + 6 kHz dev, S/N 46 dB) Total harmonic distortion (DIN at 1 kHz) MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 2% (71. 2 dBf input) STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]