User manual KENWOOD XD-A83

[. . . ] AC 120 V only Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China and Russia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V only *Other countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This starts recording of the track from the beginning. If you want to record a CD in order of track numbers \ Recording of an entire CD (CD RECORD) r Perform the CD RECORD operation while the CD player is in stop mode to start recording. Application section If you want to avoid any tune being interrupted at the end of tape \ Giving preference to the tape length over the title sequence (CD EDIT) t Edit recording of CD is possible by the simple operation of entering the recording length of the tape. Recording the programmed titles (CD PGM RECORD) Knowledge sections If you want to record only the desired tracks \ y Program the desired tracks from up to 3 CD discs in the desired order and record the programmed playback onto tape. Convenient CD recording XD-A83/A900/A700 (En) 43 Recording only desired titles (CD ONE TRACK RECORD) At the time of CD playback, any desired title can be selected immediately for recording. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1 to 3) 1 Playback of CD. Select a mode other than random play. Lights Preparation section 6 CD 03 123 0 12 2 Press the DUBBING key. In case the key is pressed with track No. 3 DUBBING CD 03 123 0 12 Basic section 3 Select "CD ONE TRACK RECORD". MULTI CONTROL CD ONE TRACK RECORD CD RECORD CD EDIT CD PGM RECORD Application section CD O NE T R A 4 Start recording. Press the ENTER key. ENTER | Scrolled display (CD ONE TRACK RECORD) ÷ Playback restarts from the beginning of the track being played and recording starts at the same time. To end recording in the middle Knowledge sections When recording has been completed, a non-recorded portion of 4 seconds will be produced and the cassette deck part will stop. The CD player will enter temporary stop condition. To record a different track, repeat the steps 1 to 4. 7 ÷ Both the cassette deck and CD player stop. 44 Convenient CD recording XD-A83/A900/A700 (En) Recording of an entire CD (CD RECORD) Perform the following operation while the CD player is in stop mode to start recording at the same time as the start of playback. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1to 3) (For the reverse mode, select " p" (two-way recording). ) Preparation section 1 Press the DUBBING key. DUBBING 2 Select "CD RECORD". 1 Select. MULTI CONTROL 2 Press SET. SET CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) 3 Select the disc. MULTI CONTROL CD R EC OR D Application section DIsC 2 4 Start recording. Press the ENTER Key. ENTER ÷ Recording of CD starts at the same time as playback. ÷ At the end of tape, the music is not recorded on the leader tape portion. If you do not want any music to be interrupted in the middle, refer to "Recording" and start recording of side B with the interrupted track. · Knowledge sections To end recording in the middle 7 ÷ Both the cassette deck and CD player stop. Convenient CD recording XD-A83/A900/A700 (En) 45 Giving preference to the tape length over the title sequence (CD EDIT) When the tape recording time is specified, recording is executed with changing the title sequence so that no title will be interrupted when the tape direction is changed at the end of one side. When the equalizer or SRS 3D is applied to the sound, the sound with the applied effect can be recorded. i When Dolby Pro Logic, Dolby 3 Stereo or DSP mode is selected, cancel it by pressing the STEREO key of the remote control unit. Recording preparations are required. · (Steps 1 to 3) (For the reverse mode, select " p" (two-way recording). ) 1 Press the DUBBING key. DUBBING Preparation section 2 Select "CD EDIT" and press the SET key. 1 2 MULTI CONTROL SET 3 Select a disc and press the SET key. 1 2 MULTI CONTROL CD ONE TRACK RECORD (Only during CD playback) CD RECORD CD EDIT CD PGM RECORD TAPE DUBBING (Only when the selected input is TAPE and tapes are present in both decks A and B) CD E DI T Basic section SET DIsC 2 ÷ Even if the disc has already been selected, select the disc again. 4 Set the tape length (recording time) and press the ENTER key. 1 2 MULTI CONTROL Application section C-60 Automatic editing of tape sides A and B ENTER ENTER 5 Start edit recording. Press the ENTER Key. EDIT A T 01 123 Knowledge sections ENTER ÷ The tape and CD stop automatically when recording has completed. Press SET. SET ROCK POP CLASSIC JAZZ MANUAL EQ1 MANUAL EQ2 MANUAL EQ3 EQ. OFF SOURCE DIRECT MA N U AL E Q 1 Basic section Go to step 3 within 15 sec. 3 Adjust the equalizer pattern. 1. Adjust the level. MULTI CONTROL Application section LO W LE VE L To decrease the level 2. Press the SET key. 123 SET To increase the level LEVE L +8 The LOW, MID and HIGH frequency bands can be adjusted independently by repeating step 3 for each of them. ÷ Each frequency band can be adjusted in the range between -8 and +8. Knowledge sections 4 Store the pattern in memory. ENTER ENTEA ÷ Wait until "LEVEL ??" or "ENTER" is displayed before pressing the key. = -8 to +8) 50 Effective Sound Adjustment XD-A83/A900/A700 (En) Enjoying Sound Field Effects Experiencing SRS 3D (Sound Retrieval System) Preparation section The Sound Retrieval System is an epochal system which produces a three-dimensional sound space by applying the most suitable processing to the sound signal on the basis of the human listening mechanism. This permits real depth and sound location, considered as difficult to realize with conventional 2-channel stereo (general stereo). A sufficient effect can be obtained for any source (CD, tape, broadcasts, etc. ). Recording with applied SRS 3D also is possible. 1 Set SRS 3D to ON. SRS 3D | Scrolled display (SRS 3D ON) sR s 3D O N Each press of the key switches SRS 3D on and off alternately. 2 Press the MODE/DEMO key. MODE /DEMO 3 Select "SRS LEVEL". 1. Select. MULTI CONTROL SRS LEVEL S. W. (Except for the XD-A700) L/R BALANCE ÷ SRS 3D ON/OFF switching is not possible during recording. Application section 2. [. . . ] 65 mm, cone type Super-tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm, dome type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Maximum input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]