User manual KETTLER RACER GT

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. If the equipment is in regular use, check all its components thoroughly every 1 -2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars. [. . . ] The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. The exercise cycle complies with the DIN EN 957 - 1/- 5/-10, class HC. it is therefore unsuitable for therapeutic use. A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. After your training by all means turn the turning handle for brake adjustment back to zero position in order to avoid heat influences on brake linings and disk flywheel. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. The brake linings should also be checked at regular intervals and adjusted as necessary. all electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e. Mobile telephones) directly next to the cockpit or the electronic controlsystem as otherwise values displayed might be distorted (e. The product is not suitable for use by persons weighing over 130 kg. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. [. . . ] When ordering spare parts, always state the full article number, spare partnumber, the quantity required and the S/N of the product. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words , , with fastening material". Raadpleeg alvorens met de training te beginnen uw huisarts en vraag of de training met dit apparaat voor u geschikt is. [. . . ]