User manual KETTLER RUTSCHENANBAU FUR SCHAUKEL

[. . . ] This KETTLER product has been designed in accordance with the latest standards of safety and subjected to constant quality monitoring. The data gained from this quality process is then incorporated in the development of our products. For this reason, we reserve the right to make changes in design and technology in order to offer our customers products of the highest standard of quality at all times. In spite of this, should you have any ground for complaint, please contact your KETTLER dealer. [. . . ] Please bear in mind that there is always a danger of children injuring themselves whilst using swings, climbing frames, toy vehicles or similar equipment. The ground in the play and safety area should consist of unbound, shock-absorbing ground material. The apparatus must stand firmly, safe from tilting or tipping. Pay particular attention: the apparatus must be set in concrete using the ground anchors included, strictly according to our illustration. Damaged components can endanger children and reduce the product life. Control all components in regular intervals of 1­3 months, depending on use, against possible damages and loose connections. Before use always check that all screws and plug-in connections and respective safety devices fit correctly. Damaged or worn parts must be replaced immediately and the apparatus is not to be used until restored. In case of need, exclusively Original KETTLER replacement parts should be used. Improper repair or constructional changes (disassembly of original parts, attachment of unapproved parts, etc. Use of the apparatus is permitted for children of up to 14 years of age (50 kg). Small children are permitted to use the apparatus only when aided by an adult, since small children are not strong enough to keep their own body weight balanced during play. Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. [. . . ] Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. [. . . ]