User manual KETTLER RX7

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. I If the equipment is in regular use, check all its components thoroughly every 1 -2 months. pay particular attention to the tightness of bolts and nuts. This applies especially to the securing bolts for saddle and handelbars. [. . . ] the apparatus must not be mounted in the immediate vicinity of main passageways (paths , doorways , corridors). I For a comfortable training position please adjust the handlebar andsaddle position to your body height. I Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. I It is not recommended to use or store the apparatus in a damp room as this may cause it to rust. Please ensure that no part of the machine comes in contact with liquids (drinks, perspiration etc. I The machine is designed for use by adults and children should not be allowed to play with it. Children at play behave unpredictably and dangerous situations may occur for which the manufacturer cannot be held liable. If, in spite of this, children are allowed to use the equipment, ensure that they are instructed in its proper use and supervised accordingly. I The exercise cycle complies with the DIN EN 957 - 1/5, class SA. it is therefore suitable for therapeutic use. I Before beginning your first training session, familiarize yourself thoroughly with all the functions and settings of the unit. I Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer. I Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters. I The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. I Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine. I Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any I A slight production of noise at the bearing of the centrifugal mass is due to the construction and has no negative effect upon operation. Possibly occurring noise during reverse pedalling result from engineering and are absolutely safe. [. . . ] ) is required, this should be clearly stated on the order by adding the words , , with fastening material". I Raadpleeg alvorens met de training te beginnen uw huisarts en vraag of de training met dit apparaat voor u geschikt is. Only use with original power unit as supplied, or with original KETTLER spare part (see spare part list). If time and/or date deviate considerably although they were reset recently the battery should be changed. [. . . ]