User manual KETTLER SAFARI GT

[. . . ] We recommend wearing suitable protective clothing and a safety helmet. I This toy is designed only for private use (no commercial or public use). I This product may only be used for the intended purpose, i. All other use is not permitted, and possibly dangerous. [. . . ] Also consider that a natural urge to play plus their temperament may lead children into unforeseen situations for which the manufacturer cannot be held responsible. i This wheeled toy does not have lights. I Keep carefully the Deko stickers not used and keep little children away from them. I Caution: While assembly of the product keep off children's reach (Choking hazard - contains small parts). I Before use always check that all screws and plug-in connections and respective safety devices fit correctly. I Instruct children in the correct use of the product, and draw their attention to possible dangers. I Please note that pedals on any wheeled toy without freewheeling appliance will turn even if the product is being pushed or is coasting. i This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle against rolling away. Do not leave children, who are not old enough to use the wheeled toy, unattended on a product. I If this product can be adjusted please adapt it to your child's height. I Do not transport anything on this product. I Never use corrosive or abrasive substances to clean the toy. Never use substances which may cause pollution of the environment. I Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil every two or three months. I For models with pneumatic tyres: When leaving wheeled toys with pneumatic tyres on floors containing solvents or which have been glued with such solvents (e. PVC) they may possibly stain it due to a chemical reaction with the natural product caoutchouc. If in doubt place something underneath the wheels. Ensure that air pressure in the tyres is correct (2, 5 bar); if air pressure is too low this increases wear, and makes riding the toy more difficult!I Please ensure that the vehicle will only be used for playing when assembly has been carried out correctly, and checked, by an adult. [. . . ] Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. I When assembling plastic grips: The grips can be pushed onto the handlebars more easily if they are first soaked in warm water. I Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. I For technical reasons, we reserve the right to carry out preliminary assembly work (e. [. . . ]