User manual KETTLER SCHAUKEL 08398-600

[. . . ] This KETTLER product has been designed in accordance with the latest standards of safety and subjected to constant quality monitoring. The data gained from this quality process is then incorporated in the development of our products. For this reason, we reserve the right to make changes in design and technology in order to offer our customers products of the highest standard of quality at all times. [. . . ] Please bear in mind that there is always a danger of children injuring themselves whilst using swings, climbing frames, toy vehicles or similar equipment. The ground in the play and safety area should be level and consist of unbound, shock-absorbing ground material. Pay attention to a sufficient distance to ground of at least 40 cm of swing elements. The apparatus must stand firmly, safe from tilting or tipping. Pay particular attention: the apparatus must be set in concrete using the ground anchors included, strictly according to our illustration. Damaged components can endanger children and reduce the product life. Control all components in regular intervals of 1­3 months, depending on use, against possible damages and loose connections. Before use always check that all screws and plug-in connections and respective safety devices fit correctly. Damaged or worn parts must be replaced immediately and the apparatus is not to be used until restored. In case of need, exclusively Original KETTLER replacement parts should be used. Improper repair or constructional changes (disassembly of original parts, attachment of unapproved parts, etc. Use of the apparatus is permitted for children of up to 14 years of age (50 kg). Small children are permitted to use the apparatus only when aided by an adult, since small children are not strong enough to keep their own body weight balanced during play. Ensure that you have received all the parts required (see check list) and that they are undamaged. [. . . ] Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. When ordering spare parts, always state the full article number, spare-part number, the quantity required and the inspection number stamped on the back. [. . . ]