User manual KEYSPAN CORDLESS VOIP PHONE

[. . . ] Never attempt to charge non-rechargeable batteries. The battery can be charged and discharged hundreds of times, but it will gradually wear out, when the operation time (standby time and talk time) is noticeably shorter than normal, then it is probably time to purchase batteries. Replace all the batteries at the same time. The rechargeable batteries must be disposed of properly and may need to be recycled. Dispose of used batteries in accordance with local regulations. Don't drop or knock the phone, rough handling may damage the internal circuit. Don't leave the phone in hot or cold places. [. . . ] In main screen, show SkypeTM window on the Desktop, press to scroll up/down in "Contacts" or "History" to the entry you wish on SkypeTM window. In Contacts or History mode, press to scroll up/down to the entries you wish on the phone display. In main screen, click this key to open SkypeTM window. Press and hold for one second to close SkypeTM window. In main screen and show SkypeTM window on your PC, click to loop through Contacts, Dial and History tabs. In Contacts or History mode, press this button to clear History or Contacts entries on the phone display. In SkypeOutTM mode, click this key to erase the last digit, press and hold for one second to clear all digits. Press and hold this button for 3 seconds to turn the phone on/off. 2 Press this button to end calls or exit Contacts and History mode. Enter number when using SkypeOutTM and Speed dial, please refer to Section 4. 4 (Setting Speed Dial) for details. Use the Volume keys to increase or decrease the volume. Press and hold for one second to maximize volume. Press and hold for one second to mute volume. Use for charging batteries only. 5 Clear/Bk Sp/SkypeTM 6 End & On/Off 7 0 ~ 9, +, *, # Numeric keypad 8 Volume keys 9 USB Connector 3. 2 Indicators Shown on the Display 3. 2. 1 LCD Main Screen: 23 No. Indictors Meaning Phone-to-PC Connection Description Connected, vertical bars show the signal strength. Press Press Press Press Press Press Press again, the Incoming Calls list appears. to scroll through the missed calls. Note: In "History" mode (see page 23), when you are browsing the list, you will see an icon on the left of each entry: outgoing call. means Making Second Outgoing Call from Contacts During a call, you can press or to show the contacts on the display, use to make the second outgoing call, when to scroll the entries, and press the second outgoing call is connected, the first call will hold on automatically. After the second outgoing call is connected, you can press 29 to toggle between the two calls. Press to end the call you are talking with and resume the other call. Note: If the second outgoing call hangs up by the second caller, you need to press to return to the first call. 4. 2. 2 Calling an Ordinary Phone Number from SkypeOutTM: Note: You have to purchase SkypeOutTM credits to call landlines or mobile phone, please go to http://www. skype. com/ for more details. If you subscribe to SkypeOutTM, refer to the following to make a SkypeOutTM call. It is necessary to dial 00 or + as a prefix of the phone number you are calling. Press and hold the 0+ button till the international sign + appears on the display or dial 00. Enter the country code, area code and phone number, for example: When making call to China: +86-21-6588XXXX or 00-86-21-6588XXXX When making call to Taiwan: +886-2-3234XXXX or 00-886-2-3234XXXX Press to make the call. for 1 second to clear all digits, or Tips: In SkypeOutTM mode, you can press and hold simply press to clear all digits and return to main screen. 4. 3 Volume Control: Press and releasing the volume control button on the left side of the phone to 30 adjust the normal volume up and down. [. . . ] -- Select the SkypeTM ring tone, please refer to page 18 for the details. -- The speaker volume on your PC or on the phone maybe set too low, please adjust the volume on your PC or the phone. 5. No Indictors on the display/Press the power key, but nothing happens. -- Be sure to press and hold the power key for 3 seconds, until the display appears. --Charge the battery, the battery level should have at least 1 segment showing, if it does not, recharge your battery, pleaser refer to page 30 for the operation. 6. [. . . ]