User manual KIDDY COMFORT PRO

[. . . ] We're happy that you have decided on the kiddy comfort pro as your choice for a child restraint system. the kiddy comfort pro is the latest innovative product in our Pro product line. Our especially energy-absorbent honeycomb© material offers the greatest possible safety in the event of frontal as well as side impact. To gain the most comprehensive protection for your child, the kiddy comfort pro must be used exactly as described in this manual. [. . . ] 3 Adjusting the reclined position (AG I only) The kiddy comfort pro is equipped with a reclined position that ensures comfortable and safe seating particularly on longer trips. The reclined position may be used only for children in Age Group I (9­18 kg). To set the reclined position, first unfasten your vehicle's own restraint system. Pull the kiddy comfort pro forward far enough so that the black support bar found on the back of the child seat can be unfolded (Fig. Then slide your kiddy back against your vehicle's seatback. The support bar must rest against the vehicle's seatback in its unfolded position. This position is reached when the seatback of the child seat rests again the seatback of the vehicle (Fig. Do not attempt to adjust the reclined position during travel. Always bring your vehicle to a complete stop to do this. Unfasten the vehicle restraint, change the position of the support bar and the seatback, and then secure your child (the child restraint system) again. 4 Adjusting the seat bottom (thigh support) You can achieve significantly better seating comfort for your child by adjusting the thigh support, which can be set in four positions (Fig. Step 1: Lift up gently on the thigh support extension. Step 2: Pull the extension out to the desired position and lock it into place. Position your kiddy in the vehicle seat as described in Section 4. Check to see whether your kiddy is adjusted to the size of your child (Section 5). The kiddy comfort pro is secured with the three-point vehicle restraint using the belt channel on the impact shield (Fig. For Age Group I, your kiddy comfort pro may be used only with the appropriate impact shield. Once the child is seated, slide the impact shield into the slots on the seat (Fig. Slide the impact shield back so that it rests right on your child's tummy. Then pull your vehicle's three-point restraint out enough so that it goes around your kiddy and can be directly fastened in your vehicle's own seatbelt lock (Fig. Make sure that the seatbelt tongue locks securely in place with a noticeable "click. If your kiddy comes with toy figures, these should be placed over the body shield for simpler belt fastening (Fig. [. . . ] 2 Removing the shoulder support covers Slide the adjustable headrest down to the lowest position. unsnap the buttons on the back sides of the shoulder supports. Now you can pull the covers off the shoulder supports from the bottom to the top. 3 Removing the seat covers The cover for the thigh support is fastened with an elastic band. [. . . ]