User manual KIDDY EVOLUNA 2

[. . . ] Infant Carrier INSTRUCTION MANUAL EN / DE / ES / FR / IT / PT / PL / NL Booklet 1 A B K C L D E F M N G H O P I Q R J 1 2 2 1 2 1 1 3 4 >6M 5 6 1 2 7 2 8 1 1 2 9 10 1 2 3 11 1 1 12 2 CLICK 13 14 ISOFIX * 15 16 1 2 17 18 1 2 19 2 1 3 20 B A 21 B 22 A 23 24 1 1 CLICK CLICK 25 A B A 26 Please read these instructions carefully before using this infant carrier for the first time. 4 Description of components Suitability General safety instructions General use / adjustments Functions of the carry handle / Adjusting the reclined position Using the newborn inlay Using the sunshade Buckling / unbuckling of the baby Loosening the belt system Adjusting the height of the belt system Buckling / unbuckling of the baby Use in the vehicle Installation with the Isofix platform Seat selection Installation steps on the Isofix platform Removal from the Isofix platform Shock absorber Use on a stroller Use as a rocker Remove / replacing the covers Removing the sunshade Removing the backrest cover Removing the seat cover Replacing covers 5 6 6 7 10 10 11 11 11 11 11 12 13 13 13 13 14 14 15 16 17 17 17 17 17 2. Care and maintenance Cleaning the seat covers Cleaning plastic parts Cleaning the belt system Steps to take after an accident Warranty 18 18 18 18 18 18 EN Operation manual Evoluna i-Size 2 IMPORTANT – Read the instructions carefully before use and keep for future reference in the storage compartment at the foot end of the carrier. So you always have it at hand whenever you need it. [. . . ] 1 Loosening the belt system Turn the carry handle in to the carry position. Before you can adjust the height of the shoulder belts, the belt system must be loosened. For this purpose, keep the central adjuster pressed in the front under the seating area (fig. 2 Adjusting the height of the belt system Open the front cover at the head end of the infant carrier by slightly pressing the hooks upward. Now turn the height adjuster handle 90° clockwise (fig. 2), then move it into the desired position upward or downward (fig. The optimum height position of the shoulder belts is reached when the belts are at the babies shoulder height (fig. Lock the height adjuster handle back into place after you have finished. Please make sure that the belt system is not twisted or does not become lodged!3 Buckling / unbuckling of the baby Always buckle up your child when it is in the infant carrier! loosen the shoulder belts as described in point 6. 1 and place them over the side of the rim of the carrier. Place your baby in the infant carrier and then position the shoulder belts over its shoulders (fig. Place the safety belt lock tongues attached to the shoulder belts over each other (fig. Now push the safety belt lock tongues into the buckle. It is locked in place when a click sound is heard (fig. Make certain that it is securely locked in place!Now pull the central belt until the belt system fits the body of the child snugly (fig. Make sure that the space between the belts and your child is no more than the width of a finger (ca. 1 cm) and that the belt system is not twisted. To unbuckle your baby loosen the shoulder belts as described in point 6. 1 and press the red button on the buckle to unbuckle your baby. [. . . ] If the shock absorbers prevent the installation of the child restraint system in the vehicle, due to the width of the vehicle, these can be removed. To do this, rotate the shock absorber (fig. 22) until it is released from the lock and then pull it off the carrying handle sidewards (fig. For assembly, carry out the steps in reverse order. [. . . ]