User manual KIDDY GUARDIAN PRO

[. . . ] Our special energy-absorbent materials provide the greatest possible safety in the event of a lateral impact. Your child safety car seat is also equipped with kiddy shock absorbers (F), which provide extensive protection during frontal impact. We're happy that you have decided on the kiddy guardian pro as your choice for a child restraint system (A). To gain the most comprehensive protection for your child, the kiddy guardian pro must be used exactly as described in this manual. [. . . ] To adjust the head (G) and shoulder rests (H), grasp the height adjustment handle (Q) on the back of the headrest (G) and pull it out gently, while simultaneously raising or lowering the headrest (G) to the desired height (Fig. Check to see that the headrest (G) is firmly locked in place by gently pressing down on it. The kiddy guardian pro is equipped with a reclined position that ensures comfortable and safe seating particularly on longer trips. To set the reclined position, first unfasten your vehicle's own restraint system if necessary. The reclined position may be used only for children in Age Group I (9-18kg) in conjunction with the impact shield. Pull the kiddy guardian pro forward far enough so that the sleeping clamp (E) found on the back of the child seat can be unfolded (Fig. The sleeping clamp (E) must rest against the backrest of the vehicle's seat in its unfolded position. the kiddy guardian pro's backrest (C) can then be lowered to the reclined position. The reclined position is reached when the headrest (G) of the child seat rests against the backrest of the vehicle (Fig. 8 Then slide your kiddy back against your vehicle's backrest. This prevents the seat from sliding backwards (Fig. Do not attempt to adjust the reclined position during travel. Always bring your vehicle to a complete stop to do this. Unfasten the vehicle restraint, change the position of the sleeping clamp (E) and the backrest (C), and then secure your child (the child restraint system) again. Check to see whether your kiddy is adjusted to the size or body weight of your child (Section 5). The kiddy guardian pro is secured with the three-point vehicle restraint using the belt guide on the impact shield (N) (Fig. Position your kiddy on the vehicle seat as described in Section 4. Push the impact shield (N) into the guide slots on the seat section (Fig. Slide the impact shield back so that it rests right on your child's tummy. Place your child in the seat and ensure that the child's buttocks press against the backrest (C). [. . . ] Free the cover around the height adjustment handle (Q) at the back of the headrest (G) and below both diagonal belt guides (B). Pull the cover off the headrest (G) from the back toward the front. Now you can pull the covers off the shoulder rests (H) from the bottom to the top. The leg support (L) cover is fastened with a rubber band. [. . . ]