User manual KIDDY MAXI PRO

[. . . ] The kiddy maxi pro is part our company's new pro line, which offers completely safety to protect your baby and growing child by means of a special material that derives energy. In order to secure your baby completely in the kiddy maxi pro seat, this is fitted in the head support area with the new material. The impact of a side collision will be absorbed particularly well before it reaches the sensitive head area of the baby. For complete protection of your baby the kiddy maxi pro has to be used exactly as is described in these directions. [. . . ] If the sun canopy is not needed, it can be fixed using the spring mounted clamp under the pan rim (fig. Below are instructions on how to dismantle or assemble the sun canopy: Now you can pull the clamp bracing (fig. Feed the clamp out of the material strap of the sun canopy. to assemble the sun canopy proceed in reverse order. When mounting make sure that the slot in the clamp (fig. 1 Choice of seat Using the child car seat In driving direction Opposite of driving direction With 2-point belt With 3-point belt With front airbag Some vehicle manufacturers enable the front airbag to be switched off. Obtain information on using seat pans from your vehicle manual or consult your authorised repair shop. The seat pan is not suitable for seats which are only fitted with a 2-point lap belt. Only use the seat pan on seats that have a 3-point vehicle belt. We recommend using the seat pan on the rear bench seat in cars. In vans the seat pan should be mounted on the seat that has the easiest access in the event of a rescue operation. After looking through the vehicle manual as well as selecting the appropriate seat, the seat pan can be fitted in the vehicle as described in the following section. Position the seat pan backwards facing the vehicle seat and turn the carrying frame in the position of drive operation (fig. Direct the lap belt of the vehicle's own 3point belt systems through both lap belt guides on the seat pan and let the belt tongue lock in place. Check that this is locked in place by pulling on the belt. Guide the shoulder belt of the vehicle's own 3-point belt systems on the back of the baby seat pan and thread this between the blue belt guide and the guide on the seat pan (fig. The automatic roll-up of the vehicle's own belt system can be disabled. A more permanent fitting of the seat pan is possible. Read your vehicle manual or consult your authorised repair shop. 1 Height adjustment of 5-point belt system and head support The kiddy maxi pro has a 5-point belt system, which guarantees optimal protection for your baby in the seat pan. In order to guarantee the best possible safety for your baby with the 5-point belt system, this must be adapted accurately to the body size. Shoulder belt and head supports must be adjusted together as a unit. [. . . ] Weave the belt through both slots on the seat pan as well as through the slot in the cover. Remove both buckle tongues from the belt (fig. Pull both belt straps through the inside cover, through the head part and rear panel. Feed the belt on the back of the seat pan from the tie loop with the central belt adjustment (fig. [. . . ]