User manual KING TECHNOLOGY SANI KING SPA FEEDER

[. . . ] Some circumstances during the first few weeks of tub installation may require initial settings to be greater than normal. These circumstances often include; unusually heavy bather usages, leaching of the wood (hot tubs), bacteria, location (indoors or outdoors) and climate. The setting may need to be 1/2 to 1 full turn greater than the chart shows. Residual of between 2. 0 to 4. 0 ppm is desirable during the first few weeks of start up. [. . . ] this may be obtained by turning the cap clockwise. CAUTION: READ CAREFULLY The Sani-King feeder is designed to use ONLY Bromine tablets and sticks. NEVER USE OR MIX WITH ANY OTHER CHEMICALS. Use extreme caution when servicing or opening your feeder. Always protect skin, eyes and clothing from chemicals at all times. NEVER open feeder when pump is operating. ALWAYS keep return lines open except when opening or servicing the feeder. ALWAYS follow chemical manufacturer's cautions and recommendations carefully for the ultimate in water sanitation and conditioning. MODEL 740 ASSEMBLY 1 Limited One-Year Warranty King Technology, Inc. will warrant this unit with a complete replacement for the original purchaser, should it prove defective by reason of improper workmanship and/or material, for a period of one (1) year from the date of original purchase. holds the option of replacing any defective part without charge if it is determined to be all that is needed to correct any situation that may arise. Parts used for replacement are warranted for the remainder of the original warranty. To obtain warranty service, you must deliver product to King Technology, Inc. Shipping expenses are the purchaser's responsibility. The name of the nearest authorized dealer can be obtained by writing or calling King Technology, Inc. at the address and telephone number provided on front of manual. Proof of purchase is required when requesting warranty service. Purchaser must present the sales receipt or other document which establishes proof of purchase. To validate your warranty, complete the warranty card that came with your unit and return it to King Technology, Inc. within 30 days of purchase and installation. This warranty does not cover defects caused by: Modification, alteration, repair or service of the product contrary to the accompanying instructions; physical abuse to or misuse of the product or operation or installation in a manner contrary to the accompanying instructions. This warranty also excludes all costs arising from the warranty and any and all claims arising out of the chemicals used in the product or their characteristics. CAUTION - Read carefully - Do not add shock in or near skimmer. 2 3 4 4A 7 5 6 8 FEEDER MAINTENANCE 1. [. . . ] Consult each chemical manufacturer's warnings and cautions for specifics. Any express warranty not provided for herein, and any remedy for breach of warranty or breach of contract which, but for this provision, might arise by implication or operation of law, is hereby expressly excluded and disclaimed. Any express warranty not provided herein, and any remedy for breach of contract but which for this provision might arise by implication or operation of law, is hereby excluded and disclaimed. The implied warranties of merchantability and of fitness for any particular purpose are expressly limited to a term of one year. [. . . ]