User manual KLEIN-HUMMEL K8-AESI16 DATASHEET

[. . . ] K8-AESI16 16-CHANNEL LINE AUDIO INPUT TO K8 BUS KEY FEATURES Professional quality digital audio Puts 8 AES3 inputs, 16 audio channels onto the K8 bus Drives (2) 200 meter K8 cabling legs Low latency No software configuration required Remote control and monitoring Single cable solution Standard category 5 cabling TECHNICAL SPECIFICATIONS Frequency Response Signal to Noise Ratio Input 20 Hz ­ 22 kHz >100dB(A) AES3, XLR female connectors x 8 (16 total channels) Sample rate input range 32 kHz - 192 kHz +4 dBu, +22 dBu Peak Two K8 bus outputs, each drives 200 meters RS-485, DB-9 female connector, open published protocol 38400 Baud, 8 Data, 1 Stop, No Parity USB adaptor Ethernet adaptor 4-position DIP 48 kHz sampling rate, 24 bit, proprietary 1. 2ms, 48 kHz input sampling frequency 1. 3ms, 44. 1 kHz input sampling frequency 0. 6ms, 96 kHz input sampling frequency 95 - 240 Volts AC (±10%), 50 - 60 Hz, wide range power supply 15 Watts IEC power cord and connector Power, Input OK OK, wink 7 lbs / 3, 2kg 19" wide x 1. 75" high x 8" deep Output Level Output Control PRODUCT DESCRIPTION The K8 digital audio distribution system transports professional quality audio across a facility over standard category 5 cable. It can be used for simple point-topoint connections or can form a distribution backbone for sending up to 16 audio channels to multiple remote locations. [. . . ] All locations have access to 16 channels of digital audio without concern over ground loops or induced noise. se K8 as a mini snake for sending audio feeds from an auditorium out a remote broadcast truck. U ount a K8 device in a cluster of powered speakers and drive the entire cluster with a single category 5 cable. M se K8 as a digital snake between the mixing console and the amplifier racks. Put another K8 branch and output device U on stage to drive the stage monitors. Distribute central background music and paging out to individual venue systems in cruise ships, entertainment facilities, convention centers, schools and conference facilities. 16-CHANNEL LINE AUDIO INPUT TO K8 BUS ARCHITECT & ENGINEERING SPECS The audio transport system shall carry 16 channels of digital audio integrated with bi-directional remote control and monitoring data over a single category 5 cable up to 200 meters in length without being actively refreshed. The digital audio format shall be uncompressed, 48kHz sampling rate, 24 bit quantization depth and shall have a total latency through the transport system of less than 0. 5 milliseconds. The system shall pass audio when powered up with no software configuration required. The input to the digital audio system shall be via an 8 stereo channel AES3 standard digital audio input with XLR female connectors mounted in an EIA standard 1 unit rackmount case with universal voltage power supply. The signal to noise ratio of the system shall be greater than 100 dB and the audio input device shall drive 2 individual category 5 cables to a length of 200 meters. [. . . ] Termination of the digital audio and control lines shall be made with DIP switches on the rear panel. The AES3 digital audio input to the digital audio distribution system shall be K+H K8-AESI16. K+H Vertriebs- und Entwicklungsgesellschaft mbH Auf dem Kessellande 4A 30900 Wedemark Germany [. . . ]