User manual KLIPSCH CHORUS II

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] If nothing has been saved in the selected preset, the display will read "Preset Empty". From this screen, press the Down or Up touch key to access other control settings. Page 6 Page 7 Features and Controls - 2 Features and Controls - 3 EQ Mode This screen is used to select two different bass emphasis settings titled "Punch" and "Depth". They are designed to complement different types of program material, such as movie soundtracks or music. The "Punch" setting emphasizes the 55Hz region, while the "Depth" setting boosts the 30Hz range. A third setting is titled "Flat", which defeats these two settings. Use the Left/Right touch keys to select the desired EQ setting. From this screen, press the Down or Up touch key to access other control settings. Room Correction This screen is used to activate the automatic Adaptive Room Correction (ARC) feature. Plug the supplied microphone into the "MIC IN" jack on the subwoofer's rear panel and place it in the intended listening position. Press the Enter key to activate the calibration sequence. "Calibrate" will be displayed along with the ascending frequency of the test tone and a bar graph of the sound level (loudness). The subwoofer will measure the room's acoustic effect and compensate for it. From this screen, press the Down or Up touch key to access other control settings. Page 9 Features and Controls - 4 Back Panel Features Keypad Lock This screen is used to lock the keypad and prevent unintentional changes to your settings by other users. After making all desired adjustments, press the Enter key to lock the keypad. "Keypad Locked Hold to Unlock" will be displayed. The display will then return to the default "Volume" screen after about 20 seconds. To unlock the keypad, press and hold the Left and Right touch keys until the display returns to the "Volume" screen. It is suggested that you write down all of your settings for future reference in case the keypad is unlocked and your settings are changed by another user. From this screen, press the Down or Up touch key to access other control settings. This section describes the features and connections found on the amplifier on the back panel of the subwoofer. It also describes the manner for connecting a second subwoofer as a "slave" unit to the primary subwoofer. Power On/Off This is the main AC power switch for the subwoofer. This switch must be in the "On" position for the subwoofer to operate and for the "Auto On" feature to function. Set this switch to the "Off" position if the subwoofer will not be used for an extended period of time (i. e. vacation) or when making any connections to the subwoofer. System Info Press This screen is used to access the software "Version" number and "System Reset" function to clear all user settings and memories (Refer to the "Save Settings" section of this manual). [. . . ] Consult the dealer or an experienced radio/TV technician for help. Warranty The Warranty below is valid only for sales to consumers in the United States and Canada. ("KLIPSCH") warrants this product to be free from defects in materials or workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, Klipsch will repair or replace (at KLIPSCH's option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty period on those parts is for a period of two (2) years from the date of purchase. [. . . ]