User manual KLIPSCH KHO-7

[. . . ] The most common difference is the desire or need to mount the speakers above ear level on a wall or under an overhang. To achieve the best performance from your KHO-7, place both speakers on the same wall facing the listening area and space them six to 15 feet apart. For a higher quality stereo image, angle down, or toe in, the speakers toward the primary listening area. This is especially important in installations that place the speaker well above ear level. [. . . ] It does not matter which wire conductor is connected to the positive or negative connection of your equipment as long as you are consistent. Be sure that the connections from the amp to the speaker on all of the various channels of your system are connected in a like manner. If this is not done, the amount of bass will be reduced and the stereo image will be compromised. Be careful not to have excess bare wire or loose strands of wire that could short from positive to negative as this could damage the speaker and amplifier. High quality speaker cable can make an audible improvement in the sound of your speakers. Your Klipsch dealer can assist you in selecting the proper cable to ensure optimal performance from your loudspeakers. PAINTING YOUR KHO-7 The grille and cabinet of your KHO-7 may be painted to match the exterior decor of your house or to blend in with the surrounding environment. For best results, properly prepare the surface before painting. Lightly sand all surfaces to be painted (cabinet and grille) with 300-400 grit sand paper. Wash these surfaces with a moistened cloth dipped into a mild detergent to remove any fingerprints or grease. Care must be taken to mask off the front of the speaker to protect the tweeter, woofer and front panel from over-spray. This will maintain the existing uniform dark color behind the grille and protect the woofer and tweeter from being damaged by the paint. Affix masking tape to the inboard wall of the grille groove and attach plastic or newspaper to the tape to cover the entire front panel of the speaker. Also before painting, mask the speaker wire binding posts on the rear of the cabinet to preserve the color-coding and conductivity. Make sure that the black and red knobs are screwed down to cover the threaded metal shafts and wrap the knobs securely in masking tape. For best results, use several light coats of paint instead of one heavy coat. This will help prevent the perforations in the grille from becoming clogged with paint. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. WARNING: Voltages in this equipment are hazardous to life. Refer all servicing to qualified service personnel. CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this device. If this unit is purchased outside of the U. S. , please contact your local dealer or distributor for service center information. and dealer service is not available, contact Klipsch Customer Service for a return authorization (RA) number before shipping. For further service information, contact: KLIPSCH CUSTOMER SERVICE 3502 WOODVIEW TRACE, SUITE 200 INDIANAPOLIS, IN 46268-1104 0 1-888-554-5665 WWW. KLIPSCH. COM KHO-7 FREQUENCY RESPONSE: SENSITIVITY: NORMAL IMPEDANCE: POWER HANDLING: ENCLOSURE TYPE: DRIVE COMPONENTS: TWEETER: HIGH FREQUENCY HORN: WOOFER: DIMENSIONS: WEIGHT: ENCLOSURE MATERIAL: FINISHES: MOUNTING: WARRANTY--U. S. [. . . ] Yes No Product Purchase Model and serial number must be included to honor your warranty card. For multiple speaker purchases, please fill out only one warranty card. Model Model Model Model Model Model Serial Number Serial Number Serial Number Serial Number Serial Number Serial Number What store did you purchase your Klipsch products from?Store Name: How did you hear about Klipsch? [. . . ]