User manual KLIPSCH KMSERIES

[. . . ] To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable. the exclamation point , within an equilateral triangle , is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. [. . . ] Frequencies above the set level are filtered out, allowing you to blend the subwoofer's output into your main speakers. "Level" ­ The "Level" control serves as an overall volume control for the subwoofer. It is used to match the output level of the sub to your main speakers. "Phase 0/180" ­ This control is used to acoustically match the subwoofer's output to your main speakers. You want to select one of the two positions, either 0 or 180, in which your sub has more output at your listening position. "Power Off/Auto/On" ­ "OFF/AUTO/ON" - Selecting "Auto" allows the sub to turn on the audio amplification when it senses an audio input signal. It will automatically turn off the audio amplification after 20 minutes if no signal input is detected. The sub has an LED on the bottom of the front panel that indicates the status of the auto function. The LED will light RED when the amplifier is in the "Off" position or in the "Auto" position with no audio signal, and GREEN when the amplifier is receiving a signal in the "Auto" position or when in the "On" position. Voltages in this equipment are hazardous to life. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. You may call 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer. This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. This Warranty does not cover product sold AS IS or WITH ALL FAULTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or implied warranties so the above exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights, which vary from state to state. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] This label indicates that this product should not be disposed of with household waste. Klipsch will keep you up-to-date on new products and promotions. ⷠYour personal information will never be resold. ⷠThis registration information is not used for warranty purposes. [. . . ]