User manual KLIPSCH R-5800

[. . . ] This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. ABOUT YOUR KLIPSCH PURCHASE Your new Klipsch architectural speakers have been designed to deliver great sound while remaining unobtrusive wherever you install them. [. . . ] Before the grille is installed, carefully aim the horn toward the listening area. swiveling Horn Tweeter (In-Ceiling Models) Klipsch Reference in-ceiling models (3000 and 5000 Series) feature a swiveling tweeter to aim the high frequencies. To aim sound directly at the listening area, gently adjust the horn to the desired angle before the grille is installed. Do not attempt to turn the tweeter stem while adjusting the swivel tweeter. AND CANADA ONLY The Warranty below is valid only for sales to consumers in the United States or Canada. Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website, www. If accuracy of cut cannot be achieved, you may add 1/4" to each dimension. Be careful not to cut through any existing wiring or plumbing. Avoid compromising any fire stops between studs. Be sure to comply with all building codes in your area. Attach the wire to the speaker using the wire's color coding or markings as a guide to maintain proper polarity. Insert the speaker assembly into the opening and attach by tightening the four Phillips screws (figure 3). The frame's "dog" legs will swivel out and "sandwich" the wall and frame together. (Klipsch new construction brackets make this simple if used prior to drywall installation. At this point, you may paint the speaker grilles before inserting them into the speakers. Klipsch grilles are designed to accept most types of paint. You may wish to remove the scrim material before painting. It may be reinserted after the paint is dry. Care should be taken to avoid excessive paint build-up in the grille perforations. OPERATING CONTROLS Mid-Bass and Tweeter Attenuator Switch (3000 and 5000 Series) Some models feature a Tweeter switch (3000 series) or both a Mid-Bass and a Tweeter switch (5000 series) located on the front baffle. the switch allows a setting of either 0dB (normal) or ­3dB in the respective frequency range. [. . . ] This Warranty is only valid for the original purchaser and will automatically terminate prior to expiration if this product is sold or otherwise transferred to another party. This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. Any unauthorized repairs will void this Warranty. [. . . ]