User manual KLIPSCH ROOMGROOVE

[. . . ] DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. dO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] The selected source is now being transmitted throughout your home and is available to other KlipschCast-enabled products. In systems not incorporating a CS-700 system (or if the cinema system in not intended to be part of the wireless multi-room system), two RoomGrooves can transmit simultaneously. To enable this feature, all components of the wireless multi-room system must be assigned to a home code from 5 to 9. Selecting a home code from 5 to 9 will allow a second RoomGroove to occupy the wireless channel which was previously assigned to the CS-700. (See "Setting the Home Code" for more detailed information. ) If two RoomGrooves are transmitting and you wish to transmit from a third and control which wireless channel will be used for the new transmission, you must first select the broadcast you wish to terminate by pressing the "Listen" button until that source is heard. Then press transmit and the new source will occupy that wireless channel and stop the transmission of the other source. You should now hear the new source in all the locations in which the previous source was playing. The new source should now be available to all active listeners. Note: If a RoomGroove is transmitting and a second RoomGroove is told to transmit, the second RoomGroove will bump the first RoomGroove and occupy that wireless channel. If you wish to configure your wireless multi-room system to allow two RoomGrooves to simultaneously transmit, see the "Transmitting Audio from Two RoomGrooves" section of this manual. Listening to Other KlipschCast Devices with Your RoomGroove The RoomGroove is designed to allow you to listen to sources connected to, or integrated into, other KlipschCast components such as another RoomGroove or the CS-700 DVD Entertainment System. To listen to a source being transmitted by another KlipschCast device, simply press the "Listen" button to access the transmitted source. The "Listen" light becomes red (or purple for a second wireless source) when a wireless source is received and played. Note: All devices in the wireless multi-room system must be set to the same home code in order for transmissions to take place. The home code dial on the rear of your RoomGroove allows you to select a code specific to all of your KlipschCast components to avoid interference from neighboring systems. The home code numbers range from 0 to 9 with 0 set as the default. All of your KlipschCast components will initially be set to 0 and allow one wireless channel to broadcast audio from a cinema system and the second wireless channel to broadcast wireless audio from a RoomGroove. The home code number should only be changed for one of two reasons: 1) There is interference from a neighboring system ­ If a neighboring system in interfering with your wireless system, simply change all KlipschCast components to another home code. KlipschCast components will only transmit and receive audio from components on the same home code. Home codes 0 through 4 can be used for systems transmitting audio from a cinema system and a RoomGroove (home codes 5 through 9 are reserved for systems transmitting from two separate RoomGrooves and no cinema system). 2) You wish to transmit audio from two RoomGrooves (not a cinema system) ­ If you wish to transmit audio from two separate RoomGrooves and not a cinema system, simply choose a home code from 5 to 9 and change all KlipschCast components to that home code. [. . . ] ⷠThislimitedwarrantyterminatesifyousellorotherwisetransfer this product to another party. Warranty Outside the United States and Canada The Warranty on this product if it is sold to a consumer outside of the United States and Canada shall comply with applicable law. To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the distributor that supplied this product. fCC Information This device complies with Part 15 of the FCC Rules. [. . . ]