User manual KLIPSCH RT-12D

[. . . ] DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade or the third prong are provided for your safety. [. . . ] ⷠUse the (UP) or (Down) key to scroll through the list of control options. ⷠUse the (Left) or (Right) Key to make adjustments to a given control setting · Use (Enter Key) when the " " appears on the display to store and recall custom settings or to lock the keypad · After adjusting the individual control parameters for "Volume", "EQ Mode", "Lowpass", "Lowpass Slope" and "Phase", your settings can be stored in one of Five user memories ("Movie", "Music", "Night", "User 1" and "User 2"). This allows for global recall of all of the above settings to tailor the subwoofer's performance to compensate for differing source material and uses. ⷠThe display backlighting will turn off if no keypad inputs are made for 10 seconds. ⷠThe display will return to the "Volume" screen if no keypad inputs are made 10 for seconds. The second button press will initiate a control adjustment or the selection of another mode. ⷠIn periods of low humidity, it is possible that a static electricity discharge to the subwoofer may cause a momentary interruption in the subwoofers output or changes to the LCD display content. Any display content errors will be corrected when the screen changes modes. "Volume" ­ Use the Left/Right cursor keys to adjust the subwoofer's volume level to match the output of your main speakers. From this screen press the down cursor key to access other control settings. "Recall Settings:" ­ This screen is used to select any one of five user defined memory presets titled "Movie", "Music", "Night" "User 1" and "User 2". Use the Left/Right cursor keys to select the desired group of stored control settings and press the Enter key " " to apply them. During initial setup, skip this screen until all other initial control adjustments have been made. If nothing has been saved "Phase" - This screen is used to adjust the subwoofer's acoustic phase to match that of your main speakers. Use the Left/Right cursor keys to adjust the subwoofer's phase from 0° to 180°. The proper setting of this control is highly dependant on room acoustics and the position of your subwoofer in the room. After setting the volume and low pass controls, adjust the phase to 0° and listen to a recording with a prominent, repeating bass line in your intended listening position. Repeat this process with the 180° setting and use the setting that yields the greatest amount of bass output. If neither of these settings is better than the other experiment with intermediate settings. From this screen press the down or up cursor key to access other control settings. "Room Correction" ­ This screen is used to activate the automatic room correction feature. Plug the supplied microphone into the ("MIC IN") jack on the subwoofer's rear panel and place it in the intended listening position. [. . . ] AND CANADA ONLY The Warranty below is valid only for sales to consumers in the United States or Canada. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase. [. . . ]