User manual KLIPSCH SW-450

[. . . ] UNPLUG this apparatus during lightning storms or when unused for long periods of time. rEFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the apparatus. [. . . ] Connect the BLACK "negative" (-) terminal of your amplifier's LEFT channel to the BLACK "negative" (-) terminal of your subwoofer's LEFT channel input ("SPEAKER Level IN"). Repeat this procedure for connecting your amplifier's RIGHT channel to your subwoofer's Take care to ensure that no bare wires from any of the connections touch any other terminals, as this could cause a short and damage your equipment. Frequencies above the control setting are filtered out, allowing you to blend the subwoofer's output with that of your main speakers. the frequency is selectable from 40-150Hz. For sources with an LFE output or that use an internal crossover, the lowpass filter should be defeated by setting the control to "BYPASS". "VOLUME" ­ This control serves as an overall volume control for the subwoofer. It is used to match the output level of the subwoofer to the main speakers. "PHASE" 0/180 ­ This control is used to acoustically match the subwoofer's output to your main speakers. Select the position either 0° or 180° in which your subwoofer has more output at the listening position. Off/Auto/On ­ When this switch is in the "ON" position, the subwoofer will remain on at all times. When this switch is in the "AUTO" position, the subwoofer will automatically turn "on" when it senses a signal. It will automatically go into "standby mode" after 15-20 minutes with no signal. When this switch is in the "OFF" position, the subwoofer will remain "off" until the switch is manually turned back to the "ON" or "AUTO" position. LED indicator­ Klipsch SW subwoofers have an LED indicator on the front that indicates the status of the built in amplifier. The LED will light blue when the amplifier is on and receiving a signal. When the unit is in standby mode or turned off, the LED indicator will turn off. Your subwoofer has a durable vinyl finish that should only require dry dusting or cleaning with a dry cloth. avoid the use of abrasive or solvent-based cleaners and harsh detergents. The brush attachment of your vacuum should remove any dust from your subwoofer enclosure. Klipsch will keep you up-to-date on new products and promotions · Your personal information will never be resold Register your product online at www. The Warranty below is valid only for sales to consumers in the United States or Canada. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. [. . . ] This Class B digital apparatus complies with Canadian ICES-003. Note: This mark applies only to countries within the European Union (EU) and Norway. This application is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. [. . . ]