User manual KLIPSCH SYNERGY CUSTOM

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. [. . . ] Connect the BLACK "negative" (-) terminal of your amplifier's LEFT channel to the BLACK "negative" (-) terminal of your subwoofer's LEFT channel input ("HIGH LEVEL IN"). Repeat this procedure for connecting your amplifier's RIGHT channel to your subwoofer's RIGHT channel input (refer to Figure 4). Take care to make sure that no bare wires from any of the connections touch any other terminals as this could cause a short and damage your equipment. "HIGH LEVEL OUT" ­ This passes the "HIGH LEVEL IN" signal out to your left and right speakers with frequencies below 100Hz removed. "LINE IN/LFE" ­ This input is filtered by the built-in "LOW PASS" (LP) crossover and is designed as a general purpose input for the subwoofer. It accepts the LFE signal output of your digital surround electronics. "LOW PASS" (LP) CROSSOVER ­ The crossover allows the user to select the upper-frequency cutoff of the subwoofer. The frequency is selectable from 40-120Hz. Frequencies above the set level are filtered out, allowing you to blend the subwoofer's output with that of your main speakers. "GAIN" ­ This control serves as an overall volume control for the subwoofer. It is used to match the output level of the subwoofer to the main speakers. Corner placement, as suggested above, will increase the amount of bass output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output. Experiment with a number of different placement options and control settings to find the one that best suits your particular room and taste. When choosing your subwoofer's location, keep in mind that you will need to connect the subwoofer's built-in amplifier to an AC power outlet. CONNECTIONS AND CONTROLS WARRANTY -- U. S. AND CANADA ONLY The Warranty below is valid only for sales to consumers in the United States or Canada. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of five (5) years from the date of purchase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts (excluding electronics and amplifiers). For products that have electronics or amplifiers, the Warranty on those parts is for a period of two (2) years from the date of purchase. To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you purchased this product. Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service. This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. [. . . ] This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call ENGLISH Optimal Connections ­ Klipsch Synergy Powered subwoofers can be connected to the subwoofer output of your electronics via the RCA jack inputs ("LINE IN") on the subwoofer's rear panel (refer to Figure 3). This can be in place of the conventional speaker wire connections ("HIGH LEVEL IN"). For more information on the controls mentioned in this manual and on bass management, see your dealer or visit www. klipsch. com. 1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a KLIPSCH authorized dealer. [. . . ]