User manual KOBIAN CYPERPIX S330

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. [. . . ] A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. [ A[ ] icon is displayed with the video data. Video clips cannot be ] icon is displayed with images which have an audio memo rotated. Press the SET button to playback the voice memo data. EN-37 Digital Camera >> 38-EN Playing Back Video Clips You can play back video clips recorded on theLCD monitor. You can also play back sound if you recording with the audio. Slide the mode switch to [ The last image appears on the screen. Select the desired video clip with the / 3. buttons. A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback, press the button. This stops playback and returns to the start of the video clip. To pause video playback Press the SET button. / / / buttons to select the image to be displayed at 3. The selected image is displayed at its regular size. A[ ], [ ], [ ] icon will be displayed in a thumbnail display. User's Manual >> Zoom Playback This mode also allows you to enlarge your image on the selected portion of the image to check for small details. Slide the mode switch to [ ]. / buttons to select the 2. You can also select the image you want to enlarge from the thumbnail display. To return to normal magnification, press the button. The image is displayed enlarged, and the magnification factor is displayed on the LCD monitor. Press the / / / buttons to select the area to enlarge. To return to regular display, toggle the appears on the screen. button until the regular display button enlarges the / The range of magnification factor is from 1x to 4x in 0. 5x increments. EN-43 Digital Camera >> 44-EN Slideshow Display The slideshow function enables you to playback your still images automatically in order one image at a time. Select [Slide Show] with the / buttons, and press the SET button. Set the playback interval with the / buttons, then press the SET button. [. . . ] Images do not appear on the LCD monitor. The LCD monitor is dark. Adjust the brightness of the LCD monitor in the photography or playback menu. Wipe clean with a soft, dry The lens is dirty. Although it is set to Auto Focus, it does The distance to the subject Get your subject within the is smaller than the effective effective focus range. [. . . ]