User manual KODAK CAMEO SHARP FOCUS QUICK START

[. . . ] GETTING TO KNOW YOUR CAMERA CAMEO SHARP FOCUS CÁMERA 1 (2) ON/OFF BUTTON (1) SHUTTER BUTTON (4) MODE-SELECTION BUTTON (3) LCD PANEL (5) REWIND BUTTON (6) SELF-TIMER BUTTON (7) VIEWFINDER ATTACHING THE CAMERA STRAP 3 LOADING THE FILM Need help with your camera?Call Kodak (United States only) toll free from 8:00 a. m. (Eastern time) Monday through Friday at 1 (800) 242-2424. (8) FLASH If the end of the film extends past the filmload mark, gently push the excess back into the cartridge. ENGLISH Congratulations!And thank you for buying a KODAK CAMEO Camera. [. . . ] Following the exposure, the Print Indicator (a) blinks in the data panel for approximately two-to-three seconds to confirm imprinting. NOTE: The imprinted data may be difficult to read if the subject area over which it is superimposed is bright or non-uniform. If the data panel is consistently dim, replace the date-back battery (see Replacing the Date-Back Battery below). MODE/SELECT/SET SERVICE INFORMATION Where to Get Help If you have any questions about your camera or difficulty in using it, reread the camera manual and check the TROUBLESHOOTING section. If you purchased this camera in the United States and have difficulty that isn't covered in the TROUBLESHOOTING section of the camera manual, obtain help from one of these resources: 1. Take the camera, the film you were using, and any sample prints to your photo dealer. Call Kodak toll free (in the United States) from 8:00 a. m. (Eastern Time Zone) Monday through Friday at 1 (800) 242-2424. Include a note with your camera, giving all details: model, date of purchase, place of purchase, a description of the problem, sample negatives and prints, a copy of the dated sales receipt, and your name and address. If possible, include a telephone number where you can be reached between 8:00 a. m. Place the camera in a plastic bag to keep out dirt and packing material. Use a sturdy carton that is large enough for you to surround the camera completely with packing material such as crumpled newspaper. Clearly write the address of the repair location and your name and address on the top and bottom of the carton. Be sure to verify a repair location before you ship the camera by calling Kodak toll free (in the United States) from 9:00 a. m. (Eastern Time Zone) Monday through Friday at 1 (800) 242-2424. When you ship the carton, it is a good idea to insure the camera for replacement value. Using the Self-Timer When you want to include yourself in the picture, use the self-timer feature. Use the Tripod Socket (19) to attach the camera to a tripod, or place the camera on another firm support. Press the On/Off Button (2) to turn the camera ON. The Self-Timer Indicator (26) appears on the LCD Panel (3) and the Self-Timer Lamp (12) glows red. In dim light, such as indoors or outdoors in heavy shade or on dark overcast days, you need flash. Your camera features automatic flash that fires when you need it. Press the On/Off Button (2) to turn the camera ON. Keep the subject within the distance range for the speed of the film in your camera (see table below). Be careful not to cover the flash, lens, and autofocus windows with your fingers. [. . . ] With the data displayed, pressing the select button in succession causes the settings for year, month, and then day to blink. On the data panel, the letter "M" indicates the location for the month and the apostrophe " ' " for the year. In time mode, pressing the select button successively causes the hour, minute, and then the colon to blink. Press the Set Button (d) to change the blinking display. () ON/OFF MODE () Film not loaded 3. [. . . ]