User manual KODAK D825 EXTENDED GUIDE

[. . . ] KODAK EASYSHARE D825 Digital Frame / Decor Series Extended user guide www. kodak. com For help with your digital frame, www. kodak. com/go/digitalframesupport Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2009 All screen images are simulated. Kodak and EasyShare are trademarks of Eastman Kodak Company. 4H6823_en Product features Top--buttons and controls Play speed/transition Slow with Wipe Medium with Pan/Zoom Fast with Fade Copy to frame Delete from frame Play order Shuffle By Date Navigation Previous picture OK/Play/Pause Next picture www. kodak. com/go/support i Side--power and connectors Power USB connector Memory card slot SD/MMC/MS/XD Memory card slot MS/MS Pro Duo Stand DC-in* * See Attaching the power cable, page 2 and Attaching the stand and faceplate, page 1. ii www. kodak. com/go/support Table of contents 1 1 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Attaching the stand and faceplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 2 Press the Copy button. The copy screen shows where you are copying from. (Example - from SD card to internal memory ) 3 Select the pictures to copy: To copy the currently displayed picture: Make sure Copy picture is highlighted. If not, press the Next arrow button to highlight it. Copy all Copy picture Exit Copy Copying from here To copy all of the pictures on the card or USB device: Press the Next Copy all . arrow button to highlight 4 Press OK. NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary for viewing and quickly fills up the frame's memory. 13 www. kodak. com/go/support Viewing and copying pictures Deleting pictures from the frame You can delete pictures from your frame's internal memory, but not from a memory card or USB device. 1 Remove a memory card or USB device from the frame, if inserted. 2 While pictures are playing from internal memory, press the Delete button. 3 Select the pictures to delete: To delete the currently displayed picture: Press the Next arrow button once to . 2 Highlight the newer firmware version, then press OK to begin the upgrade. IMPORTANT: Do not turn off the frame or remove the memory card or USB flash drive during the upgrade!When the upgrade is complete, your frame automatically restarts. If it doesn't, turn the frame off, then back on. www. kodak. com/go/support 16 Troubleshooting and support Picture frame problems If. . . Try one or more of the following Make sure the power cable that was included with your frame is connected securely (see page 2). Unplug the power cable for 5 seconds, then reconnect the cable. Press the power button. Frame freezes up or doesn't work properly. Unplug the power cable for 5 seconds, then reconnect the cable. Press the power button. Press the Play and Power buttons (see page i) at the same time, and hold for 5 seconds. (Resetting your frame does not erase your saved files. ) Nothing happens Insert a certified SD/SDHC/MMC/XD Card, with images, into the upper designated card slot, then push to seat it (see page 4). when a memory card or USB device is Insert a certified MS/MS Pro Duo Card, with images, into the lower designated card slot only, then push to seat it (see page 4). connected. IMPORTANT: Do not insert an MS Pro or MS Pro Duo card in the top slot. It may be difficult to remove. Make sure the USB device is connected securely (see page 4). Make sure the file format of your pictures is supported. NOTE: Pictures may take a longer time to display when the files are large or when using a large capacity memory card or other connected device. 17 www. kodak. com/go/support Troubleshooting and support Identifying graphic messages Graphics appear on the screen to let you know what's happening with your pictures and your frame. Graphic Description Internal memory--the current picture source is the frame's internal memory. Memory card--the current picture source is an inserted memory card. [. . . ] In the event that the exclusion of any implied warranty is ineffective under the law, the duration of the implied warranty will be one year from the purchase date or such longer period as required by law. The option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be responsible for any special, consequential or incidental damages resulting from the sale, purchase, or use of this product regardless of the cause. Liability for any special, consequential or incidental damages (including but not limited to loss of revenue or profit, downtime costs, loss of the use of the equipment, cost of substitute equipment, facilities or services, or claims of your customers for such damages resulting from the purchase use or failure of the Product), regardless of cause or for breach of any written or implied warranty is expressly disclaimed. Your rights Some states or jurisdictions do not allow exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. [. . . ]