User manual KODAK DCS SYSTEM 100

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KODAK DCS SYSTEM 100. We hope that this KODAK DCS SYSTEM 100 user guide will be useful to you.

Lastmanuals help download the user guide KODAK DCS SYSTEM 100.

Download

Manual abstract: user guide KODAK DCS SYSTEM 100

Detailed instructions for use are in the User's Guide.

 [. . . ] Exposure compensation

Image LCD/Menu Bar
Folder icon Menu icon White Balance icon Video icon (appears if Video is enabled using Main Menu) Contrast icon

Turning the Image LCD On
There are two ways to turn the Image LCD on:  Press the OK button to turn the Image LCD on in Display mode  Press the Menu button to turn the Image LCD on with the Menu bar and the last-used menu displayed. 

Displaying and Navigating the Menu Bar 1 Turn the Image LCD on. 2 Press the Menu button to turn the Menu bar on.  [. . . ] 3 Press the left or right side of the Four-way
switch to highlight the needed Menu bar icon. 

4 Press the Cancel button or Menu button to turn
the Menu bar off. 

Turning the Image LCD Off
 Press the Cancel button to turn the Image LCD off. If you turned the LCD on using the OK button and the LCD is not in Display mode,  press the Cancel button more than once. If you turned the LCD on using the Menu button,  pressing the Cancel button once turns the LCD off without returning to Display mode. 

 Alternatively you can press the Menu button
to turn the Image LCD on with the Menu bar and the last-used menu displayed. 

Making a Menu Selection 1 Navigate the Menu bar until the Folder or Menu
icon is highlighted. A dropdown menu lists the available options. 

2 Press the top or bottom of the Four-way switch
to highlight an option. 

3 Press the OK button to activate the option. 

Using the Image LCD and Digital Buttons
Turn the Image LCD on: Select a highlighted menu option: Enable Region of Interest box (Zoom mode): Implement a zoom (Zoom mode): Delete an image (Delete mode): Toggle the Menu bar on/off: Turn the Image LCD off: Dismiss a menu without implementing change: Disable Region of Interest box (Zoom mode): Press the OK button. Press the Cancel button. 

Navigate through images in all Display modes except Press the left or right side of the Four-way switch. Zoom mode when Region of Interest box is on: Navigate the Menu bar and display menus: Navigate a dropdown menu: Change to a different display mode: Move the Region of Interest box (Zoom mode): Press the left or right side of the Four-way switch. Press the top or bottom of the Four-way switch.  Histogram mode - displays a histogram and other information about the image.  Multiple Image mode- displays 4 images. There is an option in the Main menu for deleting more than 1 image. 

Selecting a Display Mode 1 Press the OK button to turn the Image LCD on
or,  if a menu is displayed,  press the Cancel or Menu button to return to Display mode. 

2 Press the top or bottom of the Four-way switch
to sequence through the Display modes in the order shown below. A pop-up appears briefly with the active mode highlighted. 
Single Zoom Histogram Multiple Delete

CAMERA IMAGES

CAMERA IMAGES Navigating Through Images
Press the left or right side of the Four-way switch to navigate through images in the selected folder. 

Selecting an Image
As you navigate through images,  they are highlighted one at a time. Release the Fourway switch when the desired image is highlighted. 

 This works in all Display modes except
Zoom mode when the Region of Interest box is enabled. 

Enabling/Disabling the Region of Interest Box in Zoom Mode
In Zoom mode you can pan or zoom when the Region of Interest box is enabled or navigate to a different image when it is disabled. Press the OK button to enable,  or the Cancel button to disable the Region of Interest box. 

Tagging Images or Recording Sounds
You can tag images that you do NOT want to delete or record sounds to be associated with an image. The tags remain when you open tagged images in the DCS Host software (included) and can be used there when selecting images. 

Display Contrast
You can adjust the contrast on the Image LCD (not on the actual images):

1 Highlight the Contrast icon. 
The Contrast screen appears. 

1 Select any Image Review mode.  [. . . ] The tags remain when you open tagged images in the DCS Host software (included) and can be used there when selecting images. 

Display Contrast
You can adjust the contrast on the Image LCD (not on the actual images):

1 Highlight the Contrast icon. 
The Contrast screen appears. 

1 Select any Image Review mode. 3 Press and release the Tag/Record button
quickly (less than one second) to tag or un-tag an image,  or press and hold the button to activate the camera's microphone and record a sound. 

2 Press the top or bottom of the Four-way
switch to move the slider bar up to lighten,  or down to darken the displayed image. 

Deleting Multiple Images
You can delete all images in a folder,  all untagged images in a folder,  all images on a PC Card,  or all untagged images on the card. 

1 Tag any images that you DO NOT want to delete
(if you plan to use a tagged option). 

2 Highlight the Menu icon and choose Main Menu
from the dropdown menu. 

4 Select the desired option.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KODAK DCS SYSTEM 100

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KODAK DCS SYSTEM 100 will begin.