User manual KODAK EASYSHARE LS420

[. . . ] KODAK EASYSHARE LS420 Digital Camera User's Guide Visit Kodak on the World Wide Web at www. kodak. com Eastman Kodak Company 343 State Street Rochester, New York 14650 © Eastman Kodak Company, 2002 Kodak and EasyShare are trademarks of Eastman Kodak Company. Eastman Kodak Company is an authorized licensee of the MMCA logo servicemark. SD logo is a trademark used under license by Eastman Kodak Company. P/N 6B5951 Product Overview Front View 1 2 3 4 5 6 9 1 Shutter button 2 Flash/Print button 3 On/Off switch 4 Viewfinder lens 8 7 5 Microphone 6 Lens with built-in cover 7 Light sensor 8 Self Timer light 9 Flash unit i Product Overview Back View 5 4 3 1 2 6 7 12 11 10 9 8 1 Viewfinder 2 Ready light 3 On/Off switch, Power light 4 Flash/Print button 5 Shutter button 6 Card/Battery door 7 LCD 8 Menu button 9 Joystick/Select button 10 Mode dial 11 Audio/Video out 12 Strap post ii Product Overview Mode Dial and Joystick/Select Button Mode dial Joystick/Select button . [. . . ] See Choosing Internal Memory or MMC/SD Card, page 9. Copy pictures or videos: 1 Turn the Mode dial to Review and press the Menu button. 2 Highlight Copy , then press the Select button. 3 Highlight an option: PICTURE or VIDEO--copies the current picture. ALL--copies all pictures from your selected storage location to the other location. 4 Press the Select button. A progress bar monitors the copy process until copy is complete. (For information on picture numbering, see page 70. ) NOTE: Pictures and videos are copied, not moved. To remove the pictures and videos from the original location after they are copied, delete them (see page 26). To apply protection to a picture or video, see page 27. 31 5 Customizing Your Camera Settings to customize camera settings according to your preferences. Use Setup Adjusting LCD Brightness You can adjust the LCD brightness to make the display easier to see. 2 Highlight Display Brightness , then press the Select button. 3 Move the joystick to scroll through the brightness settings. The available brightness settings are -2. 0 to +2. 0 in 0. 5 increments. The screen previews the changes as you scroll through the settings. This setting remains until you change it. 33 Chapter 5 Setting Video Out The Video Out feature lets you match the camera's video signal to the standard for your geographical location. Video Out must be set correctly to run a slide show on a television or other external device. 1 Turn the Mode dial to Setup . 2 Highlight Video Out , then press the Select button. 3 Highlight an option: NTSC--used in most countries except those in Europe. 4 Press the Select button to accept the change and return to the Setup menu. This setting remains until you change it. 34 Chapter 5 Selecting a Language The Language feature lets you display menus and screen messages in different languages. 1 Turn the Mode dial to Setup . 2 Highlight Language , then press the Select button. 3 Highlight an option. 4 Press the Select button to accept the changes and return to the Setup menu. The screen text is displayed in the selected language. This setting remains until you change it. Viewing Camera Information The About this Camera feature displays information that is helpful if you need to call for service on your camera. 1 Turn the Mode dial to Setup . 2 Highlight About , then press the Select button. [. . . ] m When removing the battery, allow it to cool before touching, since the battery may be hot. Locating Pictures on an MMC/SD Card Pictures and videos stored on a KODAK MMC/SD Card use a standard agreed upon by many camera manufacturers. This lets you use the card in different cameras. If you use a card reader to retrieve your files, the following description of the card file structure may be helpful: MISC folder--contains the Print Order file created when you use the Print Order feature. SYSTEM folder--used for updating camera firmware. [. . . ]