User manual KODAK K8600

[. . . ] 1 Finding a location for your printer dock plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing the custom camera insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Connecting the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handling and storing the color cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Notched corner Kodak EasyShare software opens on your computer (if it is installed). 6 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer. See the Kodak EasyShare software Help for details. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, or until the connection times-out. NOTE: With the software installed, connecting the printer dock to the computer establishes a new drive connection for the internal card reader. Pressing the Transfer button lets you view, copy, delete, and otherwise manage files on the new drive, as you do with other drives on your computer. See your computer documentation for details. To stop transfer, press the Cancel button, . To remove the card, pull it out. www. kodak. com/go/support 27 Using the printer dock plus with a computer Transferring pictures from a Kodak card reader The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock plus; however, other manufacturers' card readers are not supported. 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Open the accessory door on the printer dock. 6 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer. See the Kodak EasyShare software Help for details. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, or until the connection times-out. NOTE: With the software installed, pressing the Transfer button establishes a new drive connection for the PictBridge compatible device. You can view, copy, delete, and otherwise manage files on the new drive, as you do with other drives on your computer. See your computer documentation for details. To stop transfer, press the Cancel button, . www. kodak. com/go/support 29 Using the printer dock plus with a computer Printing from a computer We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full color enhancement, red-eye reduction, picture organization, and much more. If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 26). IMPORTANT: Wait until printing is complete before removing paper or the paper tray. Failure to do so can cause paper misfeeds or jams. Printing with Kodak EasyShare software 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). [. . . ] Disposal of this material may be regulated due to environmental considerations. Disposal of the color cartridge is not regulated and should not be subject to state or local landfill, incineration, or recycling requirements. For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www. eiae. org. Upgrading your software and firmware Download the latest versions of the software included on the Kodak EasyShare software CD and the printer dock firmware (the software that runs on the printer dock). [. . . ]