User manual KODAK DIGITAL MULTIPRINTER II SITE SPECIFICATIONS

[. . . ] {SiteSpecifications}{Production}{KodakServiceSupport}{ExternalAndInternal} Publication No. [. . . ] This equipment includes parts and assemblies sensitive to damage from electrostatic discharge. Use caution to prevent damage during all service procedures. Table of Contents Description Equipment Specifications . Operating and Service Space Requirements . Air Supply Requirements for the MULTI-PUNCH ACCESSORY . Page 3 3 3 5 5 6 6 6 6 6 7 7 7 7 8 8 2 16MAY01 ­ SS2163-1 Equipment Specifications Section 1: Equipment Specifications Packed Height: Width: Depth: Weight: 199. 3 cm (78 1/2 in. ) 153. 2 cm (60 1/3 in. ) 87 cm (34 1/4 in. ) 498. 9 kg (1100 lbs) Unpacked 71. 1 cm (28 in. ) 132 cm (52 in. ) 172. 7 cm (68 in. ) P179_0200D Height: Width: Depth: Weight: 172. 7 cm (68 in. ) 132 cm (52 in. ) 71. 1 cm (28 in. ) 453. 6 kg (1000 lbs) SS2163-1 ­ 16MAY01 3 SITE SPECIFICATIONS 4 16MAY01 ­ SS2163-1 Site Specifications Section 2: Site Specifications Operating and Service Space Requirements 122 cm (48 in. ) 91 cm (36 in. ) 76 cm (30 in. ) 203 cm (80 in. ) P179_0201DC Right Side: Left Side: Front: Back: Foot Print: 76 cm (30 in. ) 91 cm (36 in. ) 203 cm (80 in. ) 122 cm (48 in. ) 0. 975 m2 (10. 5 sq ft) SS2163-1 ­ 16MAY01 5 SITE SPECIFICATIONS Operating Environment Requirements Room Temperature: Relative Humidity: Altitude: Ambient Light: Heat Output: 15 - 30oC (59 - 86oF) 28 - 65% 2424 m (7952. 7 ft) less than 1000 lux; no exposure to direct sunlight 2200 BTU per hour Telephone Requirements Type of Line: Type of JACK: Data Quality RJ11C or RJ41S Hardware Requirements Computer: Hard Drive: CD-ROM: Monitor: Display Board: DENSITOMETER: IBM-compatible Dual Pentium 2 or 3, 450 MHz minimum processor speed, 256 MB RAM 6 - 9 Gb SCSI, larger drive for storing images 20 X (speed), IDE 19 - 21 in. , Color 24 bit, Color An X-Rite DTP 36 DENSITOMETER must be connected to the host computer Software Requirements Operating System: Operating System Service Pack: Microsoft Internet Explorer: Microsoft Windows NT 4. 0 Service Pack 6 or 6A Version 5. 01, or higher, with the most recent Service Packs and security updates Communication Requirements Internet Connection: High-speed internet connection through a cable modem or Digital Subscriber Link (DSL) Network Port: 100 BaseT or faster 6 16MAY01 ­ SS2163-1 Site Specifications Disk Space Requirements Free Disk Space: Disk Space for Installation: Other: 500 MB where the database, images, and jobs will be stored 200 MB Add necessary disk space for any other applications or hardware installed on the host computer Modem Requirements Compatibility and Compliance: Software Modem must be compatible with Microsoft Windows NT Systems and must comply with local standards Communications software must be pcANYWHERE by Symantec Corporation Interface Requirements If the MULTIPRINTER is the Last Device: If the MULTIPRINTER is the First Device: Install ACTIVE TERMINATOR 4B4697 on an open SCSI PORT. Install ACTIVE TERMINATOR 4B4697 after the last device. Power Requirements Important If the PRINTER is operating with 90 - 110 or 180 - 264 V AC, the JUMPERS on the ISOLATION TRANSFORMER must be set to the correct position by qualified service personnel. [. . . ] · ss2163_1. fm EASTMAN KODAK COMPANY Rochester, NY 14650 [. . . ]